[Paint_hore]

Yeah usually just the body without any of the rings on the body. Just the main body spacer will drop your fps about 20-25fps. I dont know anyone that uses rings on top of that.

[Fallon18]

alright thanks. but if that drops it that low -20/25 fps . how do i get it to shoot back to 290fps. when before i was shooting 280fsp ? and says only use reg for small adjustments +-10fps

[UUicked]

No body spacer, dwell 8, blue insert. Love it. The sound and or kick may be more than with some of the other settings but i'm shooting roooooopes. give it a shot.

[Fallon18]

Originally Posted by UUicked

No body spacer, dwell 8, blue insert. Love it. The sound and or kick may be more than with some of the other settings but i'm shooting roooooopes. give it a shot.

thanks man ill give it a shot

[colorado719 (Banned)]

I just used the op's settings today and it was nasty and now it's breaking in even nicer with the super flat shot and the pop makes me not regret getting rid of the geo2 in the least

[deflatedsnake]

very interesting. i have stock setting right now since i just got mine today (love it) how does it shoot compared to that since the stock is already pretty good?

[PhoenixLancer]

I used the OP's settings on my brand new (2wks used now) and all I can say is HOLY ****ING BATMAN ****!! By far the nicest gun I've shot, pretty much ever. Def recommend the settings.

[Paint_hore]

Those "ultimate settings" are what comes stock on NT's. Both of mine were set like that from the factory.

[NorCalMagic]

exactly... dye obviously knows the "ultimate settings" and every marker will react a bit differently to settings, both mechanical and electronic.

[pinoy_92]

works great for my nt. bump for other nt owners out there who is having problems.

[Orangeman4848]

Need some clarification... Just got an NT11 and obviously this first post was written around the original NT. When everyone refers to the "spacer body" or "body spacer" I'm assuming this is what the NT11 manual refers to as the "volume spacers". For these settings (blue flow insert, dwell 6, spacer body) to work, which volume spacer do I use? I have the standard red, green and yellow... or do I need one at all? Thanks all.

[Rmilledge32]

I think its referring to the black rubber deal with what looks to be a spacer on the very backside that sits in the back-cap almost. however for the NT11 i have no idea... im guessing those are the body spacers and from everything ive seen/heard green flow insert 7-9 dwell around 115-125 psi no red,green, or yellow spacer on the steam is the smoothest/most quite.. someone correct me if im wrong.

[liquidfiretibby]

the green, red, and yellow volume spacers are what the OP is more or less referring to. the NT came with none i believe, but then there was an upgrade kit that had multiple black spacers that you could use 1 or more of. the colored ones replaced these in the NT11

[Rmilledge32]

Just rolled a hopper with these settings

Dwell: 9
PSI: 120
No spacer body or rings, clean bolt
Flow insert: Green
FPS: 290-293 +/- 3

NO KICK..... i bout crapped my pants and nice tight pattern from about 65 yards away into a 5 gallon bucket. draxxus bronze blaze paint out of stock .688 UL