yes the original bolt works with no issues. The issue is described in detail in my previous post (make sure to read the quotes)
__________________
Please check out my most recent paintball video "CrownPB - 2012" it is only 3.5 minutes long and well worth your time. I am very grateful for every view I get and always appreciate feedback.
We have no problem warranty the bolt if infact the bolt is the issue. I would say that the orings are to blame here. If you have orings that are worn from old bolt and you install new bolt on these orings i can see the velocitys spiking like you have said. So i would eliminate the orings on the drive first cant expect old orings that are worn to work the same on new parts.
Power tubes orings
Valve orings
Switch orings
Keg orings
If you replace these orings and still have an issue we will need a copy of the receipt when you bought the part so we can warrant the part for you.
You will need to send in the bolt in before we can send out a new part.
I replaced the o-rings and the gun certainly seems to shoot more air with the gold bolt then stock at the same HPR and dwell settings. I will report back once I actually get to shoot some paint through it
__________________
Please check out my most recent paintball video "CrownPB - 2012" it is only 3.5 minutes long and well worth your time. I am very grateful for every view I get and always appreciate feedback.
I would just like to say a big Thank You to Eric "Shootnpoo" from Aggressivesports for all his help and the exceptional service that I received.
It is really nice to know that there are still people out there who believe in looking after their customers.
I wish you all the best and will certainly be giving you some more of my hard earned cash.
Yeah it was a cracked GT Bolt Keg. I can put a picture with my user name and real name to confirm it is intact my bolt keg. But I need a new one... There's no fixing this one. If its coming from aggressive sports I'd like it if I could add an order to be shipped with the replacement part.
James,
Can you please appease my curiosity... In the video below it is suggested that MacDev evolved from toxic toys, is there any truth to the speculation?
__________________
Have a NDZ or Tech T axe bolt you'd like to trade for Boss bolt or sell? PM me!
Donations for an ultimate bolt test would be nice too.
We have no problem warranty the bolt if infact the bolt is the issue. I would say that the orings are to blame here. If you have orings that are worn from old bolt and you install new bolt on these orings i can see the velocitys spiking like you have said. So i would eliminate the orings on the drive first cant expect old orings that are worn to work the same on new parts.
Power tubes orings
Valve orings
Switch orings
Keg orings
If you replace these orings and still have an issue we will need a copy of the receipt when you bought the part so we can warrant the part for you.
You will need to send in the bolt in before we can send out a new part.
I replaced all of those o-rings and the gun was actually able to function with the gold bolt. However, the performance was far less then ideal; sound signature and consistency were considerably worse then stock. Efficiency seemed to be about the same... I purchased this bolt right off of MacDev's website approx 4 months ago... Let me know what you think.
__________________
Please check out my most recent paintball video "CrownPB - 2012" it is only 3.5 minutes long and well worth your time. I am very grateful for every view I get and always appreciate feedback.
The first time I ever used MacDev is back around maybe the late 90s and I was building a custom cocker with the absolute best parts on the market. I chose the sonic lpr over the micro rock... later I toyed with the red valve, but ended up with an AKA valve. Like eclipse, I thought MacDev started as a cocker parts company. I'm not 100% sure, but belsales (evolution cocker) kinda disappeared around the time eclipse started up (using smart parts distribution) suggesting they are the remnants of belsales. Belsales made the smoothest ram and the best 3-way... the bullet.
__________________
Have a NDZ or Tech T axe bolt you'd like to trade for Boss bolt or sell? PM me!
Donations for an ultimate bolt test would be nice too.
Eric, or whomever. I am in need of a few small parts for a Droid. I need one eye cover screw. I also need the feedneck thumb wheel and collar (gloss black). The thumb wheel has snapped in half and the collar is cracked. Are these parts still available given the age of the Droid?
Figured I would post in here before I sent out emails just yet.
Thanks for any help in advance, Ex.
__________________
Too many markers, not enough time.
Eric, or whomever. I am in need of a few small parts for a Droid. I need one eye cover screw. I also need the feedneck thumb wheel and collar (gloss black). The thumb wheel has snapped in half and the collar is cracked. Are these parts still available given the age of the Droid?
Figured I would post in here before I sent out emails just yet.
The screen on my clone is dimming to the point where is it impossible to see out on the field. This is the clone you custom anodized (gray with blue acid wash parts)
How do I go about getting my screen replaced? It is a "B" version.
I replaced all of those o-rings and the gun was actually able to function with the gold bolt. However, the performance was far less then ideal; sound signature and consistency were considerably worse then stock. Efficiency seemed to be about the same... I purchased this bolt right off of MacDev's website approx 4 months ago... Let me know what you think.
Any Ideas MacDev support?
__________________
Please check out my most recent paintball video "CrownPB - 2012" it is only 3.5 minutes long and well worth your time. I am very grateful for every view I get and always appreciate feedback.
