[whyuuucockin]

Hello im kinda new to autocockers and i have a 04 prostock and i have no idea how to install this worr blade im getting so if some one could tell me the steps that would be great

[Reddawg]

There might be a sticky for install or google it.
WB not sure I would install not the greats board. Hard to turn on/off.
The only nice feature is eye shut off automaticly. I have one on a RF without eye works ok if I can turn it on.

[hmcl281]

go download the e1 or e2 manual, it should have the install guide.

[whyuuucockin]

Can you put a tado board in it

[dbkid0486]

Originally Posted by Reddawg

There might be a sticky for install or google it.
WB not sure I would install not the greats board. Hard to turn on/off.
The only nice feature is eye shut off automaticly. I have one on a RF without eye works ok if I can turn it on.

your talking about the worrFRAME, not the worrBLADE.

Originally Posted by whyuuucockin

Can you put a tado board in it

if your talking about the worrBLADE, then yes, tadao will fit. But if your also taking about worrBLADE than the board red is talking about isn't the one your going to have. If you have the worrFRAME, then it won't fit without modifications.

[Rebel_816]

just remember worrBLADE = Eclipse e-BLADE (E1), with just a couple differences in the frame. very simliar to the E1 frame and uses the same triggers.

worrFRAME = paperweight. its one one with the round trigger guard and no lcd screen. uses its own board.

also you can swap any of the E1, E2, zero-b, or tadao boards between any of the eblade frames.

[whyuuucockin]

Its a worr frame are they better than mech

[cruciatus111]

worrframes are okay for semi, it'll get you to where you need but it's capped at 15 BPS so its not legal in psp tournies, If I were you I would sell it, they're worth around 50-75ish and save up the money for a good board either the ZeroB or the e2 board or if you have the cash then get the tadao board with an E2 frame and sell the e2 board it'll also work with the E1 frame but the board will be cut off a bit

If you want you could also ego -button mod the worrframe so it'll have a screen and buttons for a board with a screen

[whyuuucockin]

How do i post a pic of it

[Rebel_816]

upload your pictures to an image hosting site like photobucket, then copy & paste the ".img" code onto here.

this is a worrframe, note the round trigger guard:


this is a worrblade, square trigger guard, takes eblade style boards:

[whyuuucockin]

If its a worr frame how hard is it to put a diffrent board in it

[Darkapollo]

You cant... It would need to be milled to fit an eblade board. They may 'fit' but no buttons or screen.

[barrel roll]

You can.

WGP Select Fire board (stock)
Predator Flashed SF board (stock, but after market flash)
Scenario Dreams UTB (aftermarket)

And that is without modifying the frame for a screen or buttons.

[Darkapollo]

No one does the pred code flashing any more, so thats out.
UTB? Might as well buy an E1 frame with board.

If you are going to give BS info, at least make it useful.
Paintball gateway sells the worr-blade frame for cheap, find an E1/ZeroB or E2 board and youd be all set.

[whyuuucockin]

Ok thanks

[whyuuucockin]

Would i have to get a diffrent solanoid

[hmcl281]

Originally Posted by Darkapollo

No one does the pred code flashing any more, so thats out.
UTB? Might as well buy an E1 frame with board.

If you are going to give BS info, at least make it useful.
Paintball gateway sells the worr-blade frame for cheap, find an E1/ZeroB or E2 board and youd be all set.

must agree on the bs info, you should take your own advice. the guy will still need to find a trigger, magnet, buttons and screen protector for the frame.


he was just trying to help the guy, no need to insult him.

you can use the same solenoid but why change anything. used it first and see if you like it.

[barrel roll]

1) You can still find Pred flashed SF boards around. I've got a working one in my closet.

2) What is wrong with the UTB?

3) Don't be such a snob (direct reply to the "if you are going to give BS info..." comment). I believe we've argued before, at least you're consistently pigheaded.

[epeon]

Originally Posted by Darkapollo

No one does the pred code flashing any more, so thats out.
UTB? Might as well buy an E1 frame with board.

If you are going to give BS info, at least make it useful.
Paintball gateway sells the worr-blade frame for cheap, find an E1/ZeroB or E2 board and youd be all set.

Yeah dont mind this guy, You can use a select fire board in eblade frame

[dbkid0486]

Originally Posted by epeon

Yeah dont mind this guy, You can use a select fire board in eblade frame

Only if you mill the frame to accept it. The screw holes will match up with modification, but you will need to have the back of the frame modded to be able to see the screen and use the buttons.

to the OP check Customcockers if you want to mod your frame. DCL INC does it with Ego membrane pads and it comes out fantastic. BUT, like others have said, the SF frame is pure crap. Some might work properly, but they are JUNK.

Id rather rock an E1 without any modes and bad battery life than think of using a SF frame/board.

[c.shank]

Originally Posted by epeon

Yeah dont mind this guy, You can use a select fire board in eblade frame

epeon, you are right you can use sf board in e1 or e2 frame, if you can mount pressure switch, but thats not the issue, he wants to use e1, e2 or yak in a sf frame....dont hate on dark he knows what he's talkin about. there's a member on another forum that mods the sf frames for ego button and screen pad, then you can use the led boards in a sf frame. and the select fire trigger and internals will work in the worrblade frame, i did it. Get the worrblade from pball gateway for about 25 shipped http://www.paintballgateway.com/wgpautococker.html not sure what colors are available, i know dust black is not although its still listed there. as far as buttons, well, i can supply them on cus. cockers, the screen might be another issue.