Can anyone please help me with my 1 of 5 Iron man edition 2013 Vanguard Demon. I have a leak on the top of the trigger frame (behind where the top part of the trigger) I first had a leak on the hpr aswell, but I changed the top o-ring and the leaking from there stopped, but moved on to the trigger frame.
When both of them were leaking, the hpr were leaking heavily and the trigger frame wasen`t so noticable compared to the hpr one. It is a very strong leak from the trigger frame. I have followed all videoes in the Vanguard tech videos thread but they are all for the 2012 model, but some parts are gone and others replaced.
I took the marker completly apart and changed all the o-rings I could think off on the bolt and hpr, but it wouldn`t work, it continued leaking.
Something that may have caused this is earlier, I tried to push the drive-tra in in (before all this leaking madness) and it was much harder than usual so 90% in I tried to pull it out again, but a part of it was stuck and I couldn`t get it out. I had to use much force to get it out and finally I did, but a o-ring about the size of an 0-21,0-20 or 0-19 but much thinner got out and I didnt know where it came from. What can I do?
I have the warranty card and all and I have only fired 14000 shots with it.
Sorry for my bad English, I am not English (or American