[misterkoch]

Ok so my 2k12 is having a small problem. I shoot semi with the stock board settings. The upgrades are zero ping ram, tech t bolt, Violent trigger, low pressure poppit, and the 4c eyes. When I start walking the trigger my gun will puff and no ball will come out. Almost like it is freezing.
YES I HAVE READ THE MANUAL.
Just for fun.

[ice-man]

Bump up the bolt delay , it is in your manual in the troubleshooting section under skipped shots

[xeese]

What are your pressures and what tank reg are you using?

[misterkoch]

75 lpr. Ninga slp

[misterkoch]

Originally Posted by ice-man

Bump up the bolt delay , it is in your manual in the troubleshooting section under skipped shots

Il let you know how it shoots next friday after practice.

[ice-man]

Default setting is 10 , if it is at 10 bump it up to 12 and try it , it talks about it in the board setting manual not the marker manual , my mistake

[ice-man]

Also check if your lpr spring is alligned properly , lpr spring allignment and bolt delay cause these problems .

[gamer565]

Make sure the dwell is at 6 ms and replace the rear ram oring.

[tim2thousand4]

Check the oring between the inline reg top and body

[BELOWZERO]

fresh battery