[PhrostPhreek0]

I recently got an ule mag with an xvalve from a friend but he neglected to tell me it leaks down the barrel I don't have any experience working on these is there any site that I can find the layout for the valve?

[steve_81]

It's either your powertube oring or your on/off o ring. Does the leak stop when you hold down the trigger?

[sQuidvision]

could also be the level 10 needs tuning... did it come with carriers? (little brass rings with o-rings on them)

[PhrostPhreek0]

Stops when I hold down the trigger and no carriers

[DMex]

[sQuidvision]

sounds like you need to tune your level 10... which unfortunately for you requires additional carriers.

http://www.mcarterbrown.com/forums/a...x-trouble.html

[inmylife2415]

Try a few drops of oil first, after that check your field strip screw. If that does nothing for you \/ \/

If it leaks down the barrel with the trigger at rest, you have a leaky powertube o-ring. If it leaks down the barrel with the trigger pulled, you have a leaky on/off (top) o-ring.

If that still doesnt fix you will need to mess with the lvl 10

[Freedy500]

Originally Posted by inmylife2415

Try a few drops of oil first, after that check your field strip screw. If that does nothing for you \/ \/

If it leaks down the barrel with the trigger at rest, you have a leaky powertube o-ring. If it leaks down the barrel with the trigger pulled, you have a leaky on/off (top) o-ring.

If that still doesnt fix you will need to mess with the lvl 10

yup..... I will second that

[PhrostPhreek0]

Thanks for all the suggestions ! I won't have time to mess with it this week but when I do I'll I'll let you know whats going on