New Etek owner
Picked up a cammo Etek1 that looked amazing. Seller told me it had a barrel leak so no big deal.
Took it apart to clean, replace all rings, and lube. I was amazed at how much sand was inside the rammer and this still would shoot! Don't think this rammer or frame has ever been off for any kind of maintenance.
Found the HPR only has 15 shims. I remember some of these shipped this way?
HPR looks to never been serviced. Rings dry and plenty of sand in it. Inner anodizing looks ok, but the piston might need replacing.
Where could I pick up a new HPR reg seat? This one is either missing or I lost it. Would a dye hyper reg seat work? I've used macro line cut straight and fit to size in the past. Have a spare hyper 2 that needs a new reg seat, so might pick up a 2pack reg seats for it and try.
Is it common for the cup seal to separate from it's pin? This one looks to be used this way for quite a while.
I have yet to put a ball through it, but this is build like a tank if they can handle this abuse.
hyper2 reg seats
Ripper VIS (thank you!! tim2thousand4)
Etek 4 (selling)