[thecody]

Thank you sir, some one sticky this!

[Japy]

Does the flex hardware hold the ears together in the exact same alignment as the stock plastic ****? Does it hold together securely?

Empire was allegedly supposed to send me new plastic pieces because mine fell out while I was playing but its been 2 weeks and still nothing.. I'm tired of not being able to use my eflex or having to cannibalize my events everytime my eflex falls apart more and more.

[f.t.m. electra]

Originally Posted by paintball swag#34

Anybody know where to get tinted or mirrored lens for the eflex

ansgear or paintballgateway

Originally Posted by xwiredx

Once you remove the stock plastic hardware that holds the earpiece to the eflex or event strap clip, can it be reused? I dont currently have flex screw hardware on hand, but ive been wanting to get my eflex strap/clip separated from the earpiece so i could reposition the strap over the earpiece where it normally threads thru, so i can tighten the strap up more.

yes the plastic hardware can be reused and removed, i use the flex metal hardware because the eflex ones tend to come off sometimes

[f.t.m. electra]

Originally Posted by thecody

Thank you sir, some one sticky this!

Thank you man

Originally Posted by Japy

Does the flex hardware hold the ears together in the exact same alignment as the stock plastic ****? Does it hold together securely?

Empire was allegedly supposed to send me new plastic pieces because mine fell out while I was playing but its been 2 weeks and still nothing.. I'm tired of not being able to use my eflex or having to cannibalize my events everytime my eflex falls apart more and more.

the flex hardware holds the strap and ears better then the eflex plastic ones, i has a little play but once the safety clips are installed, its firm, if you double strap your eflex, its stiff

sorry about losing your hardware, the flex hardware is secure and durable, imo you should just switch over, i found hardware in my local hardware store

[mazeofmystery]

anyone have a picture of how to cut events ears? ive never done any sort of mask modding and i just got my eflex. i dont wanna wreck it or the plaid ears i got for it haha. help a noob please? edit: i just used the stock eflex ears as a guide and used an exacto knife to trim along the edges.

[f.t.m. electra]

Originally Posted by mazeofmystery

anyone have a picture of how to cut events ears? ive never done any sort of mask modding and i just got my eflex. i dont wanna wreck it or the plaid ears i got for it haha. help a noob please? edit: i just used the stock eflex ears as a guide and used an exacto knife to trim along the edges.

thats how its done, the way you did it is the same way i did it, so your good

[Zippin35]

Figured I would toss this up to help in any way. My flex's with event ears.

[Japy]

there is definitely some play when the flex hardware is used on the eflex ears (like you said) i dont double strap my mask and wasnt 100% comfortable with the way it fit together so i put the new plastic pieces empire finally sent me in.. May give it another shot.. may also try double strapping it.

[Dabomber]

How do u double strap please help!!! Have my km strap ready

[Zippin35]

^^ The same way you single strap, just feed the strap through the slot on the side of the lens frame.

[d0cwh0]

would you be able to post up where you cut the eflex ears for the flex frames?

[f.t.m. electra]

Originally Posted by d0cwh0

would you be able to post up where you cut the eflex ears for the flex frames?

you dont have to cut the eflex ears at all, you just need to make a hole on the bottm part of the frame and ears to put hardware in