Originally Posted by choops182
so i did some research, and i think my ninja tank puts out too high of a pressure for the creed and keeps breaking the o rings
If your tank regulator isn't working properly this may be possible. I run a high pressure tank on my creed for best results actually. 800 or 850 psi crossfire(red) and it works fine. The creed actually runs best on HP in my experience.
If the leak is coming down your barrel it's a valve/cup seal issue. If you're wrong about that, then it could be one of any number of things. Sometimes a leak sounds like it's in one spot but it really isn't.
Air up the gun and put your finger over the bolt tip. Does the sound get quieter? Or stay the same? Quieter means cup seal/ front valve oring. No change means it's somewhere else.
Sometimes you can push down on your bolt pin and if you hear a leak it often means your valve orings need to be changed out.
You have nothing to lose by trying. You have to lock down the location of the leak somehow or you can't solve the problem.