[913boyd]

i have a 1.0 and i turn power on hold for 2 seconds. it says powering on battery level 75% then shuts off. i have checked connections and everything is ok there. what else could it be?

[pjerzy1]

try another battery if possible. See if the battery is bad.

[913boyd]

Trying that next!What that doesnt solve the problem?

[jaydiem]

Hold it until it powers on completely?

[pjerzy1]

try another board, might have a fried bored or the battery is bad.

[X A N A T 0 S]

Or just push the on button, which board is it? 1.0, or 1.5? Some 1.0 boards had software issues, and did crazy things such as this.

[DC19]

On some of the 1.0 boards they do that. Try just tapping the button to get it to turn all they way on (basically try holding the button for different duration's).

We can reflash our board if you send it to us. In my experience that fixes the bug.

[Wastedslayer]

Originally Posted by DC19

On some of the 1.0 boards they do that. Try just tapping the button to get it to turn all they way on (basically try holding the button for different duration's).

We can reflash our board if you send it to us. In my experience that fixes the bug.

Not to de-rail this thread but any other benefits to flashing the board? If its worth it I'd send my 1.0 Board in for a touch up.

[DC19]

Originally Posted by Wastedslayer

Not to de-rail this thread but any other benefits to flashing the board? If its worth it I'd send my 1.0 Board in for a touch up.

You get the most current stuff...?

[913boyd]

charged the same battery to 100 % and works so there is a problem with the battery.