[bronze]

Try not to order them. Most sporting good stores will have them in stock, maybe even the scuba store.

BTW, you can ask a ninja tech to confirm this. But pretty sure you need a urthene o ring

[LUXEflipYO]

what size is that oring, is it the 1x12mm like on the marq? i have the cam drive asa like my ripper had, but the manual on the blast site has the old style asa in the g6r manual.

[bronze]

015 for the tank.

I was speaking of the tank o rings need urethene. The marker o rings are fine with buna.

[LUXEflipYO]

now if the oring didnt hold, is that oring shot? i inspected it and it looks fine.

[martix_agent]

replace it. if it was leaking, it's shot.

plus it cost like 2 cents, better to replace it than to go through all that work to find out it's not sealing properly

[Trigger Finger]

Originally Posted by bronze

Try not to order them. Most sporting good stores will have them in stock, maybe even the scuba store.

BTW, you can ask a ninja tech to confirm this. But pretty sure you need a urthene o ring

you can run normal rubber orings on a tank reg. ive done it multiple times without a problem when i needed to use one in a pinch. but i would definitely recommend getting urethane ones though

[LUXEflipYO]

Update: the Asa typically has a 1x4.5mm and blast told me to try a 1.5x3.5mm and it worked like a charm, and I'll have and slp reg tonight or tomorrow, can't wait to shoot it! Big hails to Tim for trading me!