 |
12-01-2012, 09:58 AM
|
#1
|
|
Join Date: Jan 2006
Location: valentine, NE
|
Ego 6 problems....
Ok my teammate has a ego 6 that we cannot get to work for some reason. We read and tried everything we could. We just replaced all the o rings. Lubed everything. So now the problem.
Every time we air the gun up it does one of two things or both. First is we are getting a leak from the grip frame, second is that with the first few shots the balls just roll out of the barrel. We are out of ideas of how to fix it. Anny suggestions? Thanks
|
|
|
|
12-01-2012, 10:21 AM
|
#2
|
|
Midwest Massacre
Join Date: Nov 2007
Location: KANSAS
|
Check your QEVs, HPR and LPR pistons. Also if you have the stock 06 reg, make sure the shims are stacked properly. Also make sure there is no damage to the solenoid from over-tightening the grip screws.
|
|
|
|
|
12-01-2012, 06:06 PM
|
#3
|
|
The Last Thing You'll See
Join Date: Mar 2003
Location: NY ((718)) NY
|
Ball rolling out likely means you need to replace your detents
__________________
"You are entitled to your own opinion but not your own facts" ~ POTUS
Custom Ano'd Prestige CSL w/ Dart Kit
Obnoxious, NY - High Velocity, NY - Liberty, NY - Cousins, NY - Top Gun, NJ
On Target, NJ - Accurate, NJ - Skirmish, PA - CPX Sports, IL - Paintball Explosion, IL - P&L, MA - Pev's, VA
|
|
|
|
|
12-01-2012, 10:53 PM
|
#4
|
|
Join Date: Jan 2006
Location: valentine, NE
|
its leaking from the solenoid. does it mean a bad solenid? or is there something I am missing, I took the lpr and hpr apart and cleaned and lubed them but still no luck. this is beyond me.
|
|
|
|
|
12-01-2012, 10:59 PM
|
#5
|
|
Join Date: Jul 2012
Location: Michigan
|
edit
__________________
LuxeMob
EgoMafia
Last edited by peacob : 12-02-2012 at 12:23 AM.
|
|
|
|
|
12-05-2012, 12:59 PM
|
#6
|
|
Yeah, im a Dec2005 Member
Join Date: Dec 2005
Location: Alexandria, Va
|
Clean and lube the oring inside the solenoid, as well as the 3 manifold orings.
|
|
|
|
|
12-05-2012, 04:20 PM
|
#7
|
|
Eclipse Tech Support
Join Date: Jan 2003
Location: In a Tech Tent Somewhere
|
If the back section of the solenoid has holes in it...you might as well chalk that up as dead. It sounds like a weak coil either way.
On the off chance the soleniod still works fine...check the LPR piston to make sure that the reg seal is still in the end of the piston and is not damaged. If it is damaged...you'll have to replace the piston. The solenoid receives air pressure from the LPR regulator...so if there is too much pressure from the LPR...it will be vented by the solenoid manifold.
__________________
You broke it didn't you!
I Love that it takes longer to open a package for a repair on an Ego than it takes to actually fix the gun!
For the Love of Paintball....Use OILon the rammer!
If you THINK you're a Super Hero...You're NOT! SLIDE RIGHT!!!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
