I have a parker noid I got a little while ago, but it does not have a upper board soldered to it. Is there a way I can check to see if it will actuate without having an upper board? Something like connecting a 9V to the pins? Since I don't have air I can't really check to see if it will hold air, but I figured checking to see if it operates is still worth it.
There is a manual force button on it that will allow you to check the function of the pnuematic half of the solenoid.
If you want to fully test the electronic side, you will need to connect it to a board. Though you can check that the armature moves freely and test the resistance through the coil using a multimeter (should be somewhere around 50 ohms I believe)
If the resistance is correct and the armature free to move, you should be able to actuate the solenoid with a functional board.
Last edited by speedy2k4 : 12-05-2012 at 12:29 PM.