Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-24-2012, 03:41 PM #1
wdkrobsmith
Bender
 
Join Date: Sep 2009
Location: Jersey City
wdkrobsmith owns a Planet Eclipse Geo
wdkrobsmith owns a Planet Eclipse GSL
New SL94 owner.... I have a few questions

I haven't had a chance to put paint through it yet but I did take it apart, replaced a few damaged o-rings and lubed it all up and it cycles fine. I hope to get a chance to chrono it tomorrow so I've got a few questions.

Here's what I've got going on, fresh battery, fresh oil/grease, the lpr is flush, came with no sl manual.

My questions are, I have a few ninja tanks. One is set to output approx 1100psi(it's for a mag) the other two are set around 800. Will the 1100psi one damage the hpr, I've never put it on my geo? Since the tanks are adjustable, what psi output should I set them to? And since there is no SL manual, whats up with the two valves? The LP one is in now. Is it lp=smoother, hp=more efficiant? Thanks all.
__________________
Proudly sponsored by Lehigh Valley Paintball
HELLKATZ
www.hellkatzpaintball.com
http://lehighvalleypaintball.com/
www.wdkfilms.com
RTM contract player
wdkrobsmith is offline   Reply With Quote
Old 11-24-2012, 04:30 PM #2
Cracker_35
Saltine or Graham?
 
Cracker_35's Avatar
 
Join Date: Dec 2011
Location: Georgia
Annual Supporting Member
Cracker_35 has achieved Level 5 in PbNation Pursuit
Cracker_35 is Legendary
I'm not sure about the tanks, but you're exactly right on the valves.
Cracker_35 is offline   Reply With Quote
Old 11-24-2012, 04:51 PM #3
wdkrobsmith
Bender
 
Join Date: Sep 2009
Location: Jersey City
wdkrobsmith owns a Planet Eclipse Geo
wdkrobsmith owns a Planet Eclipse GSL
Thanks, and graham all the way.
__________________
Proudly sponsored by Lehigh Valley Paintball
HELLKATZ
www.hellkatzpaintball.com
http://lehighvalleypaintball.com/
www.wdkfilms.com
RTM contract player
wdkrobsmith is offline   Reply With Quote
Old 11-24-2012, 05:14 PM #4
Heaton
Rain likes to raep.
 
Heaton's Avatar
 
Join Date: Feb 2009
Location: Honolulu, HI/ Eugene, OR
Heaton is playing at Living Legends VI
Heaton owns a Planet Eclipse Geo
Heaton supports Team VICIOUS
Heaton supports Sherwood Forest
Heaton supports DLX Technology
I'd use the 800 output tanks. Not that the HPR can't handle it, but just so that your macro line isn't compromised.

There's a lot of misconception about tank output pressures. Fact of the matter is that your gun's HPR will be able to handle most whatever is thrown at it as long as there is ENOUGH pressure to regulate. At least 200psi over the HPR's output pressure should be good for consistency.
Heaton is online now   Reply With Quote
Old 11-25-2012, 09:42 PM #5
THE GH0ST 93
OXCC Freedom
 
THE GH0ST 93's Avatar
 
Join Date: Feb 2012
Location: **302**
THE GH0ST 93 owns a Planet Eclipse Geo
THE GH0ST 93 supports Team VICIOUS
THE GH0ST 93 plays in the APPA D4 division
THE GH0ST 93 has achieved Level 2 in PbNation Pursuit
Are you talking about the 2 little caps? Like the big one and the smaller tipped one? One has a set pressure, already set by Eclipse, its the small one. Now I dont know about 1100 PSI working on it, as they (people above me) said before, should be fine, I would test it.
__________________
OXCC Freedom
Valken
GI Sportz
THE GH0ST 93 is offline   Reply With Quote
Old 11-26-2012, 12:40 AM #6
h23vtec
daddylongdong
 
h23vtec's Avatar
 
Join Date: Feb 2008
Location: in your house
h23vtec owns a Planet Eclipse Ego
h23vtec has achieved Level 1 in PbNation Pursuit
id use the 800. im currently running 550 with the fixed cap on my lpr and my sl shoots great
h23vtec is offline   Reply With Quote
Old 12-04-2012, 03:04 PM #7
wdkrobsmith
Bender
 
Join Date: Sep 2009
Location: Jersey City
wdkrobsmith owns a Planet Eclipse Geo
wdkrobsmith owns a Planet Eclipse GSL
Quote:
Originally Posted by THE GH0ST 93 View Post
Are you talking about the 2 little caps? Like the big one and the smaller tipped one? One has a set pressure, already set by Eclipse, its the small one. Now I dont know about 1100 PSI working on it, as they (people above me) said before, should be fine, I would test it.
You are correct about the LPR caps, but what I was talking about the actual valves. The sl94 came with two different ones.

Thanks for all the info so far everyone. As long as it doesn't rain Saturday it will get a lot of work at "battle of the bulge" at OXCC.
__________________
Proudly sponsored by Lehigh Valley Paintball
HELLKATZ
www.hellkatzpaintball.com
http://lehighvalleypaintball.com/
www.wdkfilms.com
RTM contract player
wdkrobsmith is offline   Reply With Quote
Old 12-04-2012, 05:30 PM #8
tonycon
Knuckleheads Paintball
 
tonycon's Avatar
 
Join Date: Mar 2010
Location: Chi-Town
Annual Supporting Member
tonycon owns a Planet Eclipse Geo
tonycon owns a Planet Eclipse Ego
tonycon owns a Planet Eclipse Lv1
tonycon supports our troops
tonycon is Legendary
tonycon owns a Planet Eclipse GSL
One is the hp valve guide and the other is the lp valve guide. The hp will be a bit more efficient and the lp will be a bit smoother...with that said I have the lp valve guide in my sl94 with a bit of dwell tuning and lpr tuning 2.5 turns in from flush and mine shoots like a dream.
__________________
Swamp SLS-whitebrown CSL-Midnight/Poison LV1 Pure/Prestige GSL

Proudly Sponsored By:
PBExplosion VirtueSpire Valken Paintball

KnuckleHeads Paintball Team
Game footage
tonycon is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump