[reju]

Hi,
Is there any proper way to set up Luxe for reballs in order not to have any issues during trening? Marker should be set up at 220 fps.

TY in advance

[Modat]

No sir.

Just load em up and set the reg to your proper output pressure

[combinator]

I shoot Reballs all winter and what i did is; Feathertouch out, Dwell of 16-18 and most important, a EF-Rod (efficiency-rod).
Since this allows the luxe to cycle at the same pressure even if the velocity drops.

[reju]

OK coming back with my question. What should I do to lower FPS to 220-230 on my Luxe?

I can only achieve 260 as the slowest FPS.

1.5 luxe.

[ybekool]

Originally Posted by reju

OK coming back with my question. What should I do to lower FPS to 220-230 on my Luxe?

I can only achieve 260 as the slowest FPS.

1.5 luxe.

Did you try the Efficiency rod? It works basically the same as the Geo's inserts I believe (only difference is that you can run it safely at 280-290 fps).

Keep the feather touch screw out, up the dwell to around 18-20, adjust the manifold screw to flush. As well, if you overbore it will bring your fps down. After doing this check what you can run it at.

Let me know how that works out

[Biscuit451]

What kind of tank reg are you using? If its really high, a lower pressure will in turn allow for lower minimum pressure in the reg and therefore drop minimum velocity. Could be wrong, but I'm pretty sure that would work.

[reju]

Originally Posted by ybekool

Did you try the Efficiency rod? It works basically the same as the Geo's inserts I believe (only difference is that you can run it safely at 280-290 fps).

Keep the feather touch screw out, up the dwell to around 18-20, adjust the manifold screw to flush. As well, if you overbore it will bring your fps down. After doing this check what you can run it at.

Let me know how that works out

No I dont have EF rod.

[reju]

Originally Posted by Biscuit451

What kind of tank reg are you using? If its really high, a lower pressure will in turn allow for lower minimum pressure in the reg and therefore drop minimum velocity. Could be wrong, but I'm pretty sure that would work.

I use CP high pressure reg tank.

[bcollins92]

whats your dwell set to?

[reju]

Originally Posted by bcollins92

whats your dwell set to?

It is 16.

[reju]

Where I can buy EF Rod?? The guy (Ragin Cajun) who sells them did not reply to my PM.

[bcollins92]

I would try lowering your dwell

[Ferdi 73]

Why do you want it as low as 220 fps? I always play reball and I use the same settings as I do with paint 280-290 fps.Why mess around??

[Giruc]

dziendobry
1) lower pressure lower fps 2) raise dwell to 18 thats what i did when i play reball 3) use a .693 bore bigger bore lower fps