[Ninfofan]

I have never seen so much customer care and awesomeness from a company, Thanks Simon and everybody at empire. BTW I got my Z2 on camo finish and its absolutely beautiful

[MikeBuckler]

I turned down the speed and the sound sensitivity and now the light flashes red while in normal mode. I can't seem to get it back, any suggestions?

Nvm, seems a quick auto tune fixed it.

Hmm.. Played today and I still got the red light. Brand new batteries, but they are cheapys, could this be the issue? Lol

[Simon]

Flashing red when not feeding is usually bad batteries. Cheapy batteries could be the issue.

If it's flashing green and then red after each time it feeds that is just it showing that the motor control is working as intended and a non issue.

[MikeBuckler]

Makes sense, as they were dollar store batteries.. I won't make that mistake again lol. A little off topic, my ego 11 also had a dollar store battery, it read full on the screen but would not trip the noid .

[orlandochronic]

Originally Posted by Shawn_Savage

This is amazing. I can finally turn the speed down and feel more comfortable with brittle paint.

Is there a way to make it stop spinning like a rotor when there is no paint in it?

The rotor spins when there's no paint also

[edj628]

Originally Posted by orlandochronic

The rotor spins when there's no paint also

[convicted_knight]

my right led somehow cant emit orange color in programming mode.. its red on both sound sensitivity & motor sensing..

[Simon]

Originally Posted by convicted_knight

my right led somehow cant emit orange color in programming mode.. its red on both sound sensitivity & motor sensing..

Take the back plate off when you are adjusting it and look directly at the led's to see if they are lighting up.

[Lt. Tank]

Simon
Just got a White Z2 and its acting weird as
A) put a pod in , turn it on (like game time) spins normally and feeds the paintballs , BUT, if you let it go empty and put a new pod in it will inmediatly try to unjam not letting any paintballs down the feedtube. If I empty the hopper to look for a Jam I´ll find out there is no Jam at all.
B) Turn it on put a pod and it try to unjam
C) put 20 paintballs in , feed 10, put 20 more in and it try to unjam even with a visible NO PAINTBALL jammed

Please help, pleeease help

Batteries are brand new duracells

Also. If I go into programing mode, I´ll change speed settings to 3 wait for it to cycle to save the new setting and nothing will change,

Is it the board ?

[Lt. Tank]

Talked to Jay at paintball solutions and most likely its the board , so, They are shipping a new one.
Hope to receive it soon and get rid of the unjaming mode problems

[Evil Rocky]

Problem with my Z2 is I put a pod in and shoot a stream and then when I stop, it wont feed. I have to shake or yell by speaker to get it to spin again.

I have never changed or move the settings, put in new batteries.

Never had any problems before, but I did let it go about 2 weeks with no batteries in it. But since the whole time I owned both Z2's they where always in stock settings.

What should I do?

[bcrguy]

turn up the sensitivity. (orange setting)

[smokefools66]

So I recently got a Z2 and stumbled across this. I was showing my friend this last night and he has a white or light blue color on the settings but I don't. Is there a reason for this and what does it do? It's not the RF blue light, its right after that one.