[west180]

I am working on a project using a 16g threaded co2 cartridge.
I am using a valve to release all the air at once.
What I need is something to thread the cartridge into that has an approx 3/8" threaded opening on the other side that i can attach an air tight line to.
I was looking at the quick inflate tool for bicycle tubes and it is half way there but it has a lever to release the gas,I need to pierce the tank and have the air waiting in a braided line going to my valve which will release the gas.
Any help or suggestions would be appreciated. Thank you.

[Nosaj2189]

something like this? http://www.nmri.go.jp/eng/khirata/me...t/index_e.html

[Fubarius]

16 gram cartridges are actually kind of uncommon in paintball use. However Palmer's Pursuit Shop deals with them a lot.
http://palmer-pursuit.com/cart/indus...c-141_143.html

If you can't find what you need on the site, give them a call and describe what you need, they'll get you all set up.

[west180]

Originally Posted by Nosaj2189

something like this? http://www.nmri.go.jp/eng/khirata/me...t/index_e.html

That is the idea but I would need to puncture the cartridge.

[west180]

Originally Posted by Fubarius

16 gram cartridges are actually kind of uncommon in paintball use. However Palmer's Pursuit Shop deals with them a lot.
http://palmer-pursuit.com/cart/indus...c-141_143.html

If you can't find what you need on the site, give them a call and describe what you need, they'll get you all set up.

Thank you,I think this will work.
http://palmer-pursuit.com/cart/38x24...ter-p-169.html