[Predator1117]

Can I put a CCM pump handle on a Empire sniper?
I want to retain the hitman mod but I like the look of the CCM handles better.

[Swanie08]

Yes you can, people have done it before. You should be able to find it somewhere in the pump threads.

[Predator1117]

Unable to locate. Can u post a link?

[Swanie08]

I can't remember where it's at, just type in like, "CCM Pump handled sniper"

[mister2driver]

I've seen it and its looks pretty good.



Peace-

[honculada]

Sure does

[THE Biscuit]

SAAAAaaaaaaayyyyyyyyyyyyyyyyyy! That DOES look sharp!

[cruzj]

My sniper's hanle got cracked on the inside and I don't want to replace it with the same crap.
Any CCM pump handle would do? no modifying necessary?

THanks!

[basementN3k0]

Must be from a T2.

[honculada]

You have to modify the pump handle. Here's the thread in MCB.
http://www.mcarterbrown.com/forums/e...efthanded.html

[Outlaw Torn]

I don't know if you've fixed your pump handle yet, but I had the same problem. Empire sent me a new one for free.

[Predator1117]

The results:

Using the empire back plate as guide use a 1/2 drill bit to drill out the pump shaft. Careful the CCM handle is shorter. I drilled it to the max then added rubber blanks so I am able to lower the spring pressure if I want, then drill 1/8 pilot holes for screws.
It feels and looks much better than the stock handle plus it's easier to hold onto.