Originally Posted by alee18
So picked up an Etek 3 LT today. And tried to install the cure 3 on Etek 3, while it seems to fit, the bolt is a bit longer sticking out of the receiver by about 3/16" thats not good right?
The barrel did fit though.
The bolt sticking out doesn't matter. Also, a word of advice, any Planet Eclipse Ego/Etek bolt will fit on ANY Ego/Etek, meaning I could get a Cure 4 and install it on an Ego 5/6/SL66/7/SL74/8/SL8R/9/SL94/10/SLS/11/CSL/Etek1/Etek2/Etek3/Etek4. Likewise, you could grab a stock Ego5 bolt and install the bolt on a Ego 5/6/SL66/7/SL74/8/SL8R/9/SL94/10/SLS/11/CSL/Etek1/Etek2/Etek3/Etek4 without an issue, although I wouldn't see a point in it, it's quite doable.
As stated by Driver, stick with the stock reg if you haven't already made the solid decision.