Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-10-2012, 12:26 AM #1
SupaSteve20
 
 
SupaSteve20's Avatar
 
Join Date: Jan 2012
Location: NY
SupaSteve20 has achieved Level 1 in PbNation Pursuit
SupaSteve20 has perfected Level 1 in PbNation Pursuit
SupaSteve20 has achieved Level 2 in PbNation Pursuit
Barrel Leak Question

I pulled out my old Ion today to fix it up. My wife wants to play again but she hates being out gunned when she uses a rental. So I said I'd try and help her out.

When I attached the air the bolt (techt t) shot forward and the gun started pissing air out of the barrel. So I took it apart put the stock bolt back in, wiped the old lube off and regreased it. Everything went back together smoothly. So I aired back up and the same thing happened again. I jammed a squeegee down the breech and rocked the bolt back... This worked however its a pain in the *** cause it seems to choose when it wants to work. This didn't work with the techt bolt in place as I originally tried that first.

Fresh battery just put in

Shock tech body
Cp reg
360 QEV
Virtue board
Virtue eyes

Just tryin to figure out what's going on.
Don't tell me to read the manual
And yes I checked the site for this issue but there's too many threads and the headings aren't descriptive enough

Anyone that can help I appreciate it
__________________
"Wait what the **** did I do"
SupaSteve20 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-10-2012, 10:45 AM #2
L3GIT Meyham
 
 
L3GIT Meyham's Avatar
 
Join Date: Dec 2010
Location: Foley, Alabama
There are two o-rings on the inside of the body. That seal the air on the main body of the bolt. It's probably one if not both of the those o-rings. Make sure you use Dow 33 so you don't get bolt stick. Good luck.
__________________
1Up Design
Freelance Graphic Designer
Companies worked for:NPS/Empire brand & logo design,
J4 Paintball/marketing campaign & logo design

CBC (Christian Ballers Club)
EKK elite
L3GIT Meyham is offline   Reply With Quote
Old 11-12-2012, 12:51 AM #3
Chiumanfu
 
 
Chiumanfu's Avatar
 
Join Date: May 2005
Location: Vancouver Canada
When the bolt is thrown forward...

The sail oring (largest oring on the bolt) is bad.
The oring in the breech just behind the feed neck is bad.
The solenoid is not sealing. Check the seal at the bottom of the armature and clean out the housing.
The QEV is jammed in the exhaust position.
Debris blocking the solenoid's plastic barb or the middle hose.
__________________
PbN FB
.`..hmn..`.
Chiumanfu is offline   Reply With Quote
Old 11-26-2012, 11:44 AM #4
ballahamman32
BOOM!!
 
ballahamman32's Avatar
 
Join Date: Aug 2010
Location: shippensburg
Annual Supporting Member
ballahamman32 is BST Legit
ballahamman32 is playing at Living Legends VII
ballahamman32 owns a Planet Eclipse Etek
ballahamman32 supports DLX Technology
ballahamman32 supports Empire
probably an oring id say
__________________
I buy, sell, trade, and fix ions, ion parts anything to do with ions. I always have ion parts and full working guns. Just let me know what you need!!!

I fix ions leaks not shooting tuning, I also fix broken ion boards pm me for prices on any ion instillations or prices for fixing/ maintenance!!

SMART PARTS ION PARTS STOCK/UPGRADED ------> http://www.pbnation.com/showthread.p...7#post77505767
ballahamman32 is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump