[ProtoSkillz]

First I want to be clear, I've searched the forums and wasn't able to find a thread. If there is one I apologize in advance.

Now to my problem... My problem is that the right detent of my NT11 is being blasted to oblivion. I replaced it with the spare in the parts kit, same thing. Bought two new eye pipes and again both right detents were blasted. I even heard one shoot out.

The first couple were broken while out at the field, and the last two were done at home dry firing after I changed out my board. Please help!

[Blusylver]

It is most likely the black rubber piece that holds the eyes in place

[ProtoSkillz]

I thought it might be that and checked. I'll take another look. thanks.

[Blusylver]

Try taking it out putting it back in. Before you put the eye pipe back in make sure the rubber piece is seated properly

[ProtoSkillz]

i was tying to avoud that but just finished and i think it was the problem thanks again.

[ProtoSkillz]

It didn't seem to work. I replaced the rubber piece but ran out of detents to test it on. I ordered more and will check it out once i get them.

[Blusylver]

Either the detent isnt on the eye pipe correctly or the rubber piece isnt seated correctly. Nothing else would cause that to happen

[ProtoSkillz]

Both eyepipes were brand new out of the package before i destroyed them. I know you're right, i just don't have a way of knowing the rubber piece is in correctly until I blast a new detent. Looking into the chamber it seems flush.

[ProtoSkillz]

finally got it going. i thing inside the breach there was some some dirt or something which forced the detent up and prevented it from giving when the ball was fired. Thanks for your help.