[skibee1000]

Hey fellas, went out today and played a couple XBall matches with my new 2012 G6R. Let me just say that I'm so glad to have one back in my hands, I was stuck with an Ego11 for a little while and it doesn't hold a candle to the G6.

One of the only things I noticed was that a couple times, not every time, I would lay down a long rope of paint (like a fully hopper and pod) the gun would magically shoot on its own haha. I know there is a debounce setting on the Frenzy 5.0 board and mine is set at 02/ms. Do I need to increase the debounce, or decrease the debounce? And by how much either way? Where should it be sitting I guess is my question.

Thanks men

[gamer565]

Increase to about 10ms.

[herk8240]

where's the activation point and do you have a trigger spring

[skibee1000]

Originally Posted by gamer565

Increase to about 10ms.

Just upp'd it to 10/ms, thanks Gamer I'll let you know how it works out after next practice.

[bomsg6r]

ive been told to use 11 an that should work good

[lopez17]

Originally Posted by herk8240

where's the activation point and do you have a trigger spring

To piggyback on Herk's comments set up your trigger so it activates later in the pull. In conjunction with the spring you'll see less bounce.