Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-13-2012, 12:45 AM #1
g6rguy
 
 
Join Date: Nov 2012
Micro Switch Issue

I am the owner of a 2011 Bob Long G6R with a standard Tadao Odoshi board. I have owned the gun for about a year and recently decided to adjust the trigger on the gun.

I adjusted the trigger too tightly once (the trigger wouldn’t move at all), and then returned the trigger to its original, unadjusted state where the trigger freely moves. Now the micro switch will not “click” when I pull and release the trigger. I tried to shoot the gun (board turned on, filled air tank), but it will not shoot now. The gun also refuses to turn off without me removing the battery.

Any help that anyone can provide would be greatly appreciated. Thanks.
g6rguy is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-13-2012, 01:24 AM #2
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
Make sure you don't have the trigger adjustment to far out were it can't activate the switch.
__________________
Jolly Green (╯°□°)╯︵ ┻━┻

gamer565 is online now   Reply With Quote
Old 11-13-2012, 03:42 PM #3
theblindchicken
49'er
 
theblindchicken's Avatar
 
Join Date: Jun 2011
Location: Long Beach, CA
theblindchicken is an NCPA player
theblindchicken is an NCPA National Champion
theblindchicken plays in the APPA D5 division
If it isn't the trigger adjustments, it may be that the internals of the switch have slipped and rendered it unusable.
theblindchicken is offline   Reply With Quote
Old 11-20-2012, 07:44 PM #4
offthahorse
 
 
offthahorse's Avatar
 
Join Date: Nov 2012
Location: Fayetteville NC
offthahorse has achieved Level 1 in PbNation Pursuit
offthahorse has perfected Level 1 in PbNation Pursuit
Or if you removed the board at all make sure you remounted it correctly. A tiny bit too far back and the trigger wont make contact
offthahorse is offline   Reply With Quote
Old 11-22-2012, 08:14 AM #5
2pipes
Legend in my own MIND
 
2pipes's Avatar
 
Join Date: May 2012
Location: Houston, TX
2pipes owns a Planet Eclipse Ego
2pipes supports Team VICIOUS
2pipes has perfected Level 1 in PbNation Pursuit
2pipes supports DLX Technology
Because of both the problems you stated. I sounds like the the board is misaligned. The microswitch will not actuate with the trigger movement? See if you can click the microswitch you may need to remove the trigger. The other interesting thing is the push button in the rear of the gun doesn't seem to be aligned with one of the board ie it won't try off. To test the board on/ off switch remove the board. Put it on flat surface hold the battery in place on the prongs and test the on/ off. This is what I would do facing the same problems.
__________________
CUSTOM CARBON FIBER HOPPERS and GUNS SPIRES click below
http://www.pbnation.com/showthread.php?t=4040966
Luxe MOB

Ronnie Dixon fan club #30
2pipes is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump