[ecres88]

how do i set my etek 3 stock board back to stock settings..

[ecres88]

theres no way to do it? i couldnt find anything in the 92 page manual

[sauronfpc]

page 31 of manual, also here on pb stated couple of times...


whilst in SET Up mode, it is possible
to reset all of the control parameters
to the factory default settings in the
following way:
1. Push and hold the lock button for
two seconds.
2. The “E”, “g” and “O” on the Navigation
Console will repeatedly flash blue to indicate that the
factory default settings have been restored.

[ecres88]

well i have done that at this point. but i cannot get this gun to shoot psp3 12.5 with eyes on i dont understand whats giong on here

[tonycon]

The factory reset puts the board back into stock settings= firing mode 1-uncapped semi and tourney lock on...