Hello nation. In sitting here with my gun torn apart and trying to figure out which oring goes where.
Long story short, i got a boss bolt about 6 months ago and I wanted to change the orings as I was having a bit of problems. Ill get to that later
My main question is. I have the bolt sitting here with a set of the orings. (The xsv ones) now my problem is I'm sitting here with 4 o rings and have no idea where they go. I have the 2 larger ones that are the same size and the two smaller ones with one being darker than the other. I'm so confused as to where they go. I never got a little paper saying what goes where and I can't find it online. I'm sitting here with my gun all opened up and I need help.
Now my problem with the gun is its set 1.5 turns out, 5 dwell, long spring. a little over 160and it will shoot 290 +\- 4 and then once I shoot a rope, the speed will bump down to 250. Afterwards with the pressure still at a little over 160, it shoots 270 +\- 4 then it will slowly creep back up to 280 +/-4 i sometimes have to crank it to almost 180
Can anyone help ASAP please?
Edit! I should add that when I took off the 2 back orings, the 1st one (not the very back one) was smaller than the back one. Any reason for this? I was told the smallest was in the back
UCF knights paintball
Empire Axe w/ XSV boss bolt
Last edited by soflaballer954 : 11-18-2012 at 07:38 PM.