Infamous Bolt

JoshC90 · 11-17-2012, 05:35 PM

Quote:

Originally Posted by Corn Chips

Quick question: Will it be 100% pointless to use the Boss bolt with stock barrel? I thought I'd have my Lurker by today but USPS lagged and I don't have it yet. Should I just use the stock bolt one more time?

Not at all, its still going to allow you to drop your dwell and psi pressure which will lead to better efficiency which is the entire reason to pick one up. But the lurker barrel will add more plus some consistancy over the chrono

Corn Chips · 11-18-2012, 10:28 AM

So I did get the barrel before going out yesterday. It didn't work well with the Valken Fate I was shooting, but it shot great with the stock barrel.

Also, does anyone know how the O-rings should be set up? There's a yellow one on the bolt, along with a big flat black one, and another one in the bag. I don't know if I'm doing it right. A pic would be helpful if possible.

soflaballer954 · 11-18-2012, 07:46 PM

Quote:

Originally Posted by Corn Chips

So I did get the barrel before going out yesterday. It didn't work well with the Valken Fate I was shooting, but it shot great with the stock barrel.

Also, does anyone know how the O-rings should be set up? There's a yellow one on the bolt, along with a big flat black one, and another one in the bag. I don't know if I'm doing it right. A pic would be helpful if possible.

I also have this question. If I'm correct the 2 that are the same size are the middle orings? And the smallest is for the front and biggest for the back?

Corn Chips · 11-18-2012, 08:10 PM

This is what mine looked like out of the bag, along with another o-ring that was loose in the bag. This is how I shot it yesterday.

snoograss · 11-18-2012, 10:07 PM

Quote:

Originally Posted by TheBoss33

Maybe this will help.

Two pages back

1 Evil Package · 11-19-2012, 02:41 AM

So i ordered my boss bolt with the o-ring kit for the bolt guide. of course ill be following the recommended starting settings. I just dont get when they say to have the velocity adjusted 1.5 turns out? I know its in regards to the velocity adjuster on the back of the bolt. but how exactly do i know where to go for those 1.5 rotations? Im new to the axe, and i was getting horrible efficiency with the stock bolt, 7.5 dwell, and 190 psi. btw the only thing i currently have on my axe is the redline board, and a .689 sly barrel. Im sure this has been answered before, but I couldnt find anything on it.

TheBoss33 · 11-19-2012, 08:12 AM

Turn the velocity adjuster all the way in till it seats lightly, then back out 1.5 turns.

1 Evil Package · 11-21-2012, 01:21 AM

So i just turn the velocity adjuster all the way in counter clockwise, then 1.5 turns clockwise? What type of efficiency would I be looking to get out my axe with the infamous bolt running your recommended settings with a peanut 45/45 tank? and how does slick honey work with boss orings and the bolts? since that my lube of preference.

btw my bolt comes tomorrow. im stoked! cant wait to get out of work and enjoy my 4 day weekend.

1slowdub · 11-21-2012, 11:02 PM

I feel like a total moron. I received my Infamous bolt today and none of the springs seem conical. I've been sliding them on the bolt to see which ones "snap," and it seems as though neither side really "snaps" on.

I read through about 15 pages looking through, but didn't see any mention of it.

Can someone fill me in? Are these springs supposed to be conical?

TheBoss33 · 11-21-2012, 11:07 PM

Quote:

Originally Posted by 1slowdub

I feel like a total moron. I received my Infamous bolt today and none of the springs seem conical. I've been sliding them on the bolt to see which ones "snap," and it seems as though neither side really "snaps" on.

I read through about 15 pages looking through, but didn't see any mention of it.

Can someone fill me in? Are these springs supposed to be conical?

They are that same size at both ends. So no more issues from putting the spring on backwards.

[NA]WARLORD · 11-22-2012, 10:53 AM

Quote:

Originally Posted by italsteve_6

One more question that just came to mind... I've heard it is better if you break in a new axe before installing any bolt upgrades, is there any truth to this?

Boss is correct but once your reg is broken in you'll notice better performance gains with a lighter bolt.

ncstatered21 · 11-22-2012, 04:06 PM

About to give this a shot. Been tweaking with the Lurker bolt for a bit and wanting to give this a shot too. Looking forward to it.

polabear · 11-24-2012, 10:24 PM

Still doing some light tuning on mine, but love it... sooooo sweet!.

bunkerking_13 · 11-27-2012, 10:16 AM

Just ordered my Infamous Bolt guide orings.

Will any setting need to be tweaked?

polabear · 11-27-2012, 01:08 PM

Quote:

Just ordered my Infamous Bolt guide orings. Will any setting need to be tweaked?

BOLT GUIDE????? ~DROOL~

bunkerking_13 · 11-28-2012, 09:37 AM

Lol..

ncstatered21 · 11-28-2012, 01:12 PM

Quote:

Originally Posted by bunkerking_13

Lol..

I believe I am getting some bolt guide orings today too.

bunkerking_13 · 11-28-2012, 01:24 PM

Really grinds my gears that I cannot find my dentist pick. For removing orings.

ncstatered21 · 11-28-2012, 09:14 PM

Got my bolt today and infamous bolt guide orings. First shot was 315. I was confused. Shot two more and got 263, 262. Guess ill have to up the pressure a bit till things are broke in.

Using stock boss settings and short spring. Couldn't do much testing at the apartment.

Really excited for more testing.

11shooter · 11-28-2012, 10:31 PM

Do any settings get change after adding the infamous bolt guide orings

ncstatered21 · 11-28-2012, 10:56 PM

Quote:

Originally Posted by 11shooter

Do any settings get change after adding the infamous bolt guide orings

I would say you might be able lower pressure due to higher fps.

I'm going to tune eventually and will report back on settings.

But I thinks the different bolt guide orings last longer and might increase your FPS slightly.