[JesseCanuck19]

I have a Pure energy 68/3000 about 6 years old. I have recently had it Rehydro tested in April this year. The tank it's self leaks a full fill in about a week. I had 2000 psi in the tank last time I tried to air up my guns and it won't air up any marker. I then compressed the pin to see if it actually had air and it did. Any ideas?

[JesseCanuck19]

Also my Asa is working properly because I tested it with another tank.

[tvise]

SO what you are saying is that the air does not come out where the fill nipple is?

I am kinda confused on what you are saying.

Try tapping the gauge to see if it is stuck...

[EvilPimp_]

sounds like your reg pin may be damaged, or too short for the asa plunger to push the pin in all the way. When you look at the pin, does it look flush with the top of the reg, or is it recessed?

[JesseCanuck19]

Originally Posted by EvilPimp_

sounds like your reg pin may be damaged, or too short for the asa plunger to push the pin in all the way. When you look at the pin, does it look flush with the top of the reg, or is it recessed?

The pin is defiantly the problem and Yes it is recessed. I was just wondering if it was a 5$ fix or I need a new reg?