[basementN3k0]

Originally Posted by crowntheking

Have you tried switching out the poppet?

If you want to try that I know tim2thousand4 will hook you up.

i'm a little too busy to tune/perform massive overhauls to my markers right now (i do enought re-work on fighter jets at work)... i'm going to send it to tim for some love and maybe a premium bolt.

[basementN3k0]

Originally Posted by tim2thousand4

I've got him

da troof!!!

[crowntheking]

Originally Posted by tim2thousand4

I've got him

Good to hear. For anything Bob your the go-to guy.

[VIP3R]

Originally Posted by basementN3k0

srsly? who the **** puts a one way spring in backwards?
the only thing i can think of is that there's a ****-load of dow55 in the noid because there was a bunch in the LP hose (that i replaced). it also helps to read what others have posted and to use the search feature.

Wow, little aggressive aren't we? It has happened before with people, so don't get all hissy fit on me. For all I know you did put it in backwards. It was just a SUGGESTION/IDEA. Not to mention Gamer suggested to see if it was on straight, not necessarily backwards. And I'll admit that I skimmed over what he said and misunderstood. Anyway, you asked for help and we are giving input in return. Relax I won't interfere anymore. Hope it gets resolved.

[2pipes]

Originally Posted by basementN3k0

srsly? who the **** puts a one way spring in backwards?
the only thing i can think of is that there's a ****-load of dow55 in the noid because there was a bunch in the LP hose (that i replaced). it also helps to read what others have posted and to use the search feature.

At field last weekend and kids mini kept jamming. I walked over, and asked if him to show me the return spring. Yep in backwards the smaller end kept catching the bolt when it was returning to allow a new ball. My super powers of deduction (No). Did the same thing showing my daughter how to clean her mini. So + 2 on people who put one way springs in wrong.

Haha

[VIP3R]

Originally Posted by 2pipes

At field last weekend and kids mini kept jamming. I walked over, and asked if him to show me the return spring. Yep in backwards the smaller end kept catching the bolt when it was returning to allow a new ball. My super powers of deduction (No). Did the same thing showing my daughter how to clean her mini. So + 2 on people who put one way springs in wrong.

Haha

[Trigger Finger]

Originally Posted by 2pipes

At field last weekend and kids mini kept jamming. I walked over, and asked if him to show me the return spring. Yep in backwards the smaller end kept catching the bolt when it was returning to allow a new ball. My super powers of deduction (No). Did the same thing showing my daughter how to clean her mini. So + 2 on people who put one way springs in wrong.

Haha

yeah but the spring on the mini is completely different. its a lot harder to see which end is smaller than the other on the mini's spring. the g6r's poppet spring i more cone shaped so its pretty obvious which side is what. also the the smaller end can only go one way and that is sitting on the poppet.

[Cocker_Madness]

Originally Posted by basementN3k0

i forgot that i put larger, better gauges on the tester... stock pressures are 190/75 and the pressures i've been using are 210+/80... i'm at sea level. my buddy, marcusgar21 has a G6R running a 165/65 in idaho and it's shooting 285+/-2. my G6R is shooting 260+/-20... i'm like WTF!?!?!??!

i think your problems are the gauges are not reading the exacts pressures, this happened to me when i switched my gauges for lagers ones, they wasn't reading the exact same pressure of the stock ones that come with the tester, example:

larger gauges was 72psi, then when i switched back to the stock one was reading 56psi, almost a 16psi difference, that's why i just keep using my stock gauges on the tester...

[basementN3k0]

It was doing the same thing with the stock gauges.

[madrussian23]

hey i think i know what it is..... do you have tape or some type of grip collar on the outside of the reg itself???? if you do make sure your not covering the lil hole thats on the side of the reg. this chokes the marker.... happened to me. lmk thanx...

[basementN3k0]

i took that off and it was still doing it...

[0.775Volts]

Originally Posted by Cocker_Madness

i think your problems are the gauges are not reading the exacts pressures, this happened to me when i switched my gauges for lagers ones, they wasn't reading the exact same pressure of the stock ones that come with the tester, example:

larger gauges was 72psi, then when i switched back to the stock one was reading 56psi, almost a 16psi difference, that's why i just keep using my stock gauges on the tester...

That's why most of us swap the stock gauges for Ashcroft gauges. The stock gauges are notoriously inaccurate.

[basementN3k0]

i still need to pick up a set of ashcroft gauges...