Invert Mini Problems Guide

Bconaway · 11-10-2012, 09:44 AM

Hey guys noticing alot of people having problems of some sort with their mini. Quick tip if you don't have a manual I suggest downloading one, and if you have an iPhone their is a Mini Manual (final) online that you can make a bookmark for on your home screen.
Secondly if you are having problems of ANY kind be sure and check your O-Rings and see if they are dirty, damaged, or broken. If they are this might be your problem!
Next if your having a gas leak make sure you are set at 200 psi and that your velocity isnt outfurther than 3/4 of the way. Also check your gas line in your fore- grip and make sure it is connected properly and check to see you tank is screwed in correctly.
Also if your gun just isn't firing properly or isn't firing at all first check you trigger and make sure it is adjusted right, and that you have a magnet behind your trigger! If your mini is shooting one or two balls then dropping the rest check to make sure your board is all the way up and completely connected to your gun(this happened to me, there was a small gap between the board and the marker itself).
Lastly be sure and check to make sure your battery is name brand and not dying, if your light is flashing orange or red i suggest getting a new battery. Check all your settings and make sure you Delay and ROF is set correctly.
That's all for now any other problems I'm sure I could help you with if needed so just ask! Also will post the link for the final manual in a sec

Bconaway · 11-10-2012, 09:49 AM

http://ganz-paintball.com/files/mini.pdf

Really good helpful guide!! Suggest adding to home screen if your on an iPhone

Bconaway · 11-14-2012, 08:20 AM

Bconaway · 11-16-2012, 03:22 PM

Double bump

asazeth · 12-07-2012, 05:59 PM

my Mini is shooting at 450 and if I get it Under that I am lobing Balls 2 feet infront of me -- Any Ideas ( I bought it Used ) other than that it works great I just Go through ALOT of air

Bconaway · 12-09-2012, 09:11 PM

Quote:

Originally Posted by asazeth

my Mini is shooting at 450 and if I get it Under that I am lobing Balls 2 feet infront of me -- Any Ideas ( I bought it Used ) other than that it works great I just Go through ALOT of air

Hey sorry just saw your post.
Honestly with that kind of problem it sounds like something is wrong with either your Asa, solenoid, or MAYBE your bolt. Probably one of the first two. Because of this I would not mess with it personally. Instead you should run it by the nearest PB shop and see what they say.
Oh also I've had similar problems that was actually just caused by the spring being messed up.