[oldmanian]

So I have a 1.5 and decided to swap out the core, I first tried the pooty core, but couldn't get it to not leak. I then put in the 2.0 core and the marker won't load.

The bolt stays far enough forward that it prevents paint from entering the breach. Anyone have any idea what this might be? There is no audible leaks that would indicate that an o-ring isn't sealing enough to prevent the spring pushing the bolt forward, so i am just ind of stumped.

Thank in advance for any help.

[Wastedslayer]

Make sure your bolt guide is screwed in all the way, if it is then make sure the internal spring in the 2.0 bolt is going into the hole for it on the 2.0 bolt guide.

[oldmanian]

Good call. The bolt guide was indeed not in all the way. I took it out, cleaned the threads and put it back together and went right on this time.
I didn't want to force it too bad the first time....

now for some settings....