[paintballcrazy94]

Hey

I have a Custom Prouducts V2 Regulator, whenever i go to lower the velocity i turn it half a screw and i get no air to my marker all of a sudden, when it's chronoed at 280fps, turning the screw to increase it to 290fps air comes rushing out of the regulator screw hole.
So I am going to rebuild the regulator, not sure on how to tear it down and I cant find a manual or video on how to do it on the new ones?
Help please!

Thanks

[paintballcrazy94]

sent an email to Rich for a faster response hopefully

[mr Rockwell]

Originally Posted by paintballcrazy94

sent an email to Rich for a faster response hopefully

I got a response few days ago but still waiting on another mail for solution of the problem. Guess we have to be patient:/

[paintballcrazy94]

Originally Posted by mr Rockwell

I got a response few days ago but still waiting on another mail for solution of the problem. Guess we have to be patient:/

yah i guess eh, if i dont get a response by tommorow I am gonna call, i got a marker down now.. i need this regulator rebuilt asap and cant find manual or ****

[paintballcrazy94]

thank you custom products for having the worst customer service ever.. dont answer your emails, PM's, phone calls.. what a ****ing joke

[CustomProductsRich]

We offer the best customer support in the industry. If you send it in, we will be happy to rebuild it for you free of charge like we do with all our products. The definition of customer service is not DIY.

[destey]

thinking of getting a gen3 inline regulator.

1. Are there versions that come with a gauge port, or is there only one version of the reg and the adapter w/port is needed to use a gauge?

2. If I buy one with a gauge port, does it need a gauge in it not to leak, or does it come with a plug?

thanks!

[ttimberlak443]

What is the output pressure set to out of the factory on the V2 Inline Regulators?

[rsion4191]

Where can I find this piece?

[paintballer37991]

Originally Posted by rsion4191

Where can I find this piece?

That's just a 90 degree macro fitting

[rsion4191]

I don't need the fitting. I just need the collar piece before the fitting.

[ttimberlak443]

Originally Posted by rsion4191

I don't need the fitting. I just need the collar piece before the fitting.

It'll be easier to just replace the entire fitting. They run for less thank $5.00

[vincib]

Hopefully we see more tanks available soon

[Tunggoy]

Hi would it be better if I change my cp tank to low pressure to use it for my luxe? Thanks

[Dizzy1127]

Hi,

I have an ego 11 and a CP tank reg (V2?) on a crossfire 45/4500. the POPS asa will not engage on the CP reg. I have to screw on the reg with the ASA engaged, and i can degas fine but cant reengage or gas up. I read that it may be due to the "shorter pins". Is there a solution to this?

[asylum11]

ok so i have a 68/4500 cp tank with a 08/07 manufa. date

first question...is it a 3 or 5 yeard hydro??

2nd question.....what's the best way to remove the reg for hydro testing??

reason being my local scuba shop/koorsen fire and security shop WILL NOT take my regulator off. I myself i have never un-screwed a reg from a tank so im not confident at all in doing it but i guess i have to. So how do i go about doing it?? Tools, straps,...what would i need and how do i need to apply them and work them correctly. Also like where and how to apply the wrench/pressure to screw the reg off, not to mention how to screw it back on correctly. Reason they said they wouldnt take my reg off i because there is no "flat spot" on the reg to wrench it off safely?? But to me almost every reg...even today...is mosly round. The koorsen guys looked at the slot's/teardrop grooves going down the reg all around it and told me that a "special tool" was ment to get in thoes groves liek a wrench and take it off?? I thought it was b/s and told them that i was sure they were just there for syle/design so we had to disagree on that.

Hope i can get some help or pointed in the right direction...thanks.

[asylum11]

uhhh anyone plz>?

[paintballer37991]

A strap wrench and some muscle. Manufactures locktite the regs from the factory so you need to break that seal by hand

[CustomProductsRich]

Remove the fill nipple and the tank gauge and use a strap wrench and it will come off it's Loctite on.

[Kbug]

I went to fill up my CP 48/4500 this past weekend and as soon as it got a little bit of air in it, the burst disk blew. I just too it out and was going to replace it when I noticed the old one didn't have a rating. It has a 7.5K in the reg that is good, it's the other one that blew. I have a 1.8K and 5K burst disk in my parts box. Will either of those work?

Edit: Anyone? I need a tank for this Saturday

[Ego_Trip]

I heard somewhere that my CP tank reg has a lifetime warranty. My tank reg is leaking and I'm not able to get it apart. Is it true about the warranty? Would I be able to send it in and have the reg rebuilt?