 |
11-14-2012, 10:13 PM
|
#1
|
|
minion
Join Date: Dec 2009
Location: Michigan
|
Finally found these. One user posted a pic with one of these on his geo, but he got the fitting from a coworker and didn't know where the coworker got it from. Alas, I've finally found it 
http://www.ebay.com/itm/FIVE-Push-to...item2c697ee234
I also found a white one in google that was located at "the find .com" but couldn't find anything else on it. I saved the picture and uploaded it though:
And is this the right size? There's a bunch of different sizes, but was pretty sure it's 1/4 od and 3/8 npt. Correct me if I'm wrong.
__________________
Adam "Minion" Pender
Last edited by pbkidminion : 11-14-2012 at 10:18 PM.
|
|
|
|
11-15-2012, 12:01 AM
|
#3
|
|
Sinister Ops
Join Date: Feb 2008
Location: McDermott, OH
|
If only the compression sleeve on the black model was red!
__________________
Planet Eclipse Etek w/. Star frame, 08 Ego expansion board, Etek 2 regulator, Ego10 OOPS ASA, SLS Cure 3+ bolt w/. inserts, Zick kit, Kila detents, Violent thumbwheel, PE red laser eyes, Shaft 4 barrel kit w/. all backs and fronts, both Bump pistons.
V3 Dye Rotor w/. Virtue board
114/4500 Carleton w/. Myth reg
Ego/Etek Parts FS/T
|
|
|
|
|
11-15-2012, 12:56 AM
|
#4
|
|
Join Date: Jul 2011
Location: Westminster C.O.
|
Good find brew.
|
|
|
|
|
11-15-2012, 07:23 AM
|
#5
|
|
minion
Join Date: Dec 2009
Location: Michigan
|
Quote:
|
Originally Posted by msweeneygt
If only the compression sleeve on the black model was red! |
You could always just paint, or more likely duracoat it.
__________________
Adam "Minion" Pender
|
|
|
|
|
11-15-2012, 08:31 AM
|
#6
|
|
|
the max working pressure for the white fitting is only 145psi with a proof pressure of 450, so it wont work. the ones above that aren't even rated for pressure(that I could find) so they won work either.
the fitting needs to have a working pressure in the range of 800-1200psi
|
|
|
|
|
11-15-2012, 08:44 AM
|
#7
|
|
Join Date: Feb 2003
Location: NC
|
I wouldn't use those. Those are plastic water/air compressor fittings. I do plumbing and use them all the time. These need to be able to handle whatever your tank output pressure is. Usually 550-800psi range. Even if they handle the pressure, and that's a big if, even the slightest pressure from a dive and these will snap off.
And you need 1/4npt x 1/4od, not 3/8 x 1/4
Last edited by carolinaragetc : 11-15-2012 at 08:48 AM.
|
|
|
|
|
11-15-2012, 11:05 AM
|
#8
|
|
Boneyard Paintball
Join Date: Nov 2006
Location: Plymouth, WI
|
The black ones look like they are for MICROline not MACROline. I could be wrong...
|
|
|
|
|
11-15-2012, 11:08 AM
|
#9
|
|
minion
Join Date: Dec 2009
Location: Michigan
|
Macroline is 1/4 inch od, right? That's what the black ones are for
__________________
Adam "Minion" Pender
|
|
|
|
|
11-15-2012, 11:34 AM
|
#10
|
|
Boneyard Paintball
Join Date: Nov 2006
Location: Plymouth, WI
|
Yes, macroline is 1/4" OD. Microline is 5/32" OD.
That listing has black fittings with 3/8" NPT threads. Markers use 1/8" NPT threads for fittings.
I wouldn't use them. They are rated for under 200psi working pressure.
Last edited by MeŠiCX : 11-15-2012 at 11:53 AM.
|
|
|
|
|
11-15-2012, 01:01 PM
|
#11
|
|
I'm ya huckleberry...
Join Date: Aug 2009
Location: Va Beach
|
that plastic reminds me of the banjos on ions...lol.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
