[holson72]

Here's a couple videos of the latest PTFE coated Eigenbolt shooting. For all dynamic o-rings, I am using silicone of the stock sizes. (Note: I tried 011 on the bolt guide and they are too small. I also tried several metric sizes; but didn't get a good fit yet - the 012 Silicone seem to be working well, with about 1000 dry fire cycles and 650 paintball fired).



All shots fired today were with 8ms dwell, 160 psi on the VA gauge, 285 fps, 70 ci tank, 47* ambient temp, and shooting Valken Redemption.

First the efficiency:

Pic 1 is before any shots fired (note: the gauge isn't extremely accurate as 0 really isn't 0, and the tank is LP output).




Pic 2 is after shooting one full Rotor.




Pic 3 is after shooting a second full Rotor.





Now the videos - please pay no attention to the ROF, the gun is in Semi...so the slow shooting is a result of my fingers; not the bolt..

First hopper:





Second hopper:

[OoZoo]

Wow good stuff, pretty quiet aswell

[BTrain]

Did you chrono the marker? Was it a standard or HC rotor?

[SeanP.]

Not bad.

[holson72]

Originally Posted by BTrain

Did you chrono the marker? Was it a standard or HC rotor?

Standard rotor.

And yes, I did chrono...282-287 fps. I will add that to the op.

[jim4130]

cant wait for mine to get in.

[Anadrol]

Very nice

[Rhino1XL]

Damn Jim!

[Spy 1]

coolio