Problem Mikko Hunttunen Yakuza oled ultralite board
hello friends, my name is Francisco, I'm from Chile. I have a problem with my card tadao "Mikko Ultralite Hunttunen Yakuza oled board". I need to update the firmware, but I can not get the USB cable. My card has no USB input as some, from what I've read is that it is a special USB cable and the connector of the eyes which is like a sheet or something. I would greatly appreciate someone's help please. thanks
okay from what i understand is your board didnt come with a usb cable? Its not special you can go to any electronics store and buy either a micro or mini usb, i forget which one it is but its realtively easy to find. If you cant get a electronics store in your country that carries the correct cable tadao has the cable for sell.
The Mikko Huttunen Yakuza boards from Tadao come in two different models, one with USB and one without. It sounds like you have the board without a USB connector. You will not be able to update your firmware at home. The 'mini-B' USB cable required is common to mobile phones, digital cameras, and is not special.
The Mikko Huttunen Yakuza boards from Tadao come in two different models, one with USB and one without. It sounds like you have the board without a USB connector. You will not be able to update your firmware at home. The 'mini-B' USB cable required is common to mobile phones, digital cameras, and is not special.
Hello. thanks for replying. My card does not bring the USB cable. But I've seen some pictures that achieve update. My uestion is ... there will be a special USB cable and the connector from the eyes of the markers? My card does not have the USB connector of the cell = (.'ve Also read that the card I have is the first to hit the market and it brings no USB model.
Problem Mikko Hunttunen Yakuza oled ultralite board
