 |
10-02-2012, 12:17 PM
|
#1
|
|
|
reflex rail problem
my new reflex keeps breakng paint and i have no idea why. my friend also has one and his is fine. i have regreased the bolt but tha didnt work. please help
|
|
|
|
10-02-2012, 12:35 PM
|
#2
|
|
Join Date: Jul 2012
Location: Michigan
|
You need to tell us a little more about your setup, like what your values are on the board
For the sake of saying it:
-make sure the eyes are clean
-make sure you're using a hopper than can keep up with the gun
-make sure you have a fresh battery
-make sure your rate of fire isnt something absurd that your gun cant even cycle at
__________________
LuxeMob
EgoMafia
|
|
|
|
|
10-02-2012, 04:37 PM
|
#3
|
|
Join Date: Apr 2011
Location: Colorado
|
Check paint quality, eye pipe, loader tension, and everything else above too.
__________________
MOWING FACES WITH A KARNIVOR PRO
Paintball is like drugs: It's expensive, addictive, and it hurts everyone around you.
|
|
|
|
|
10-02-2012, 10:44 PM
|
#4
|
|
Join Date: Apr 2005
Location: United States
|
Where are the breaks happening? Barrel, breach, or hopper?
|
|
|
|
|
10-14-2012, 09:57 PM
|
#5
|
|
|
i think theyre breaking in the breach. it might be my hopper because i changed some setting, but it still broke before that. all setting are factory and ive only shot it in semi
|
|
|
|
|
10-15-2012, 11:41 PM
|
#6
|
|
|
im pretty sure its just cuz i didnt have an oring in one part of my barrel and loaddr tension  thanks guys |
|
|
|
|
10-27-2012, 04:19 PM
|
#7
|
|
|
nvm its in the breech
|
|
|
|
|
10-28-2012, 05:15 AM
|
#8
|
|
Join Date: Apr 2011
Location: Colorado
|
Make sure the eyes can see each other. What color is the board when you turn it on with no paint?
__________________
MOWING FACES WITH A KARNIVOR PRO
Paintball is like drugs: It's expensive, addictive, and it hurts everyone around you.
|
|
|
|
|
10-29-2012, 03:16 PM
|
#9
|
|
Semi Pro at Civ Pro
Join Date: Jun 2005
Location: Yes, a refrence to EVA
|
Turn your loader to a lower speed/tension. What brand of paint are you shooting? Try another brand and report back.
__________________
Borosilicate Barron
HK
|
|
|
|
|
11-09-2012, 05:34 PM
|
#10
|
|
Join Date: Nov 2012
Location: TN
|
what are your settings on the reflex? it could be the hyper 3 is set too high.
|
|
|
|
|
11-13-2012, 03:29 PM
|
#11
|
|
|
put all your board settings back to the stock configuration
also make sure your eye pipe is all the way back
|
|
|
|
|
11-13-2012, 09:01 PM
|
#12
|
|
|
Replace your blue oring. Happened to me this past weekend.
|
|
|
|
|
12-01-2012, 03:43 PM
|
#13
|
|
|
i haven't changed any board settings, i replaced every single oring, and i haven't touched the reg. also im shooting marballizer
|
|
|
|
|
12-01-2012, 03:44 PM
|
#14
|
|
|
im shooting different types of paint, some break more than others, but im getting at least a few breaks from evry kind
|
|
|
|
|
12-01-2012, 08:53 PM
|
#15
|
|
|
You chronod it? Could be shooting hot.
|
|
|
|
|
12-01-2012, 10:36 PM
|
#16
|
|
Join Date: Apr 2011
Location: Colorado
|
How cold is it there?
__________________
MOWING FACES WITH A KARNIVOR PRO
Paintball is like drugs: It's expensive, addictive, and it hurts everyone around you.
|
|
|
|
|
12-13-2012, 03:10 PM
|
#17
|
|
Join Date: Dec 2012
Location: Lubbock
|
You said you'd lubed your bolt. It may be that you haven't fully reassembled the bolt. Once you have the back cap off, take the bolt out completely and make sure that you have the can and manifold attached. The can will not always thread onto the manifold if you just remove the back cap. If you have the manual, page 14.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
