I recently picked up an 03 Trilogy Pro Stock that the previous owner put some aftermarket bits on. I've never actually needed to work
on my Trilogy Tactical, and I come from a Model 98 background, so I really would appreciate some tips and/or direction for this interesting combination of problems I'm having. It has an Orracle 3-way and a CP reg, otherwise it is apparently stock. I run air. Paint was pretty small for the barrel.
For the most part, it functions and fires normally, with a mild tendency to short stroke but it may just be the funky 'flame' trigger throwing me off. I had no issue with short stroking my Tac all day, but again, different trigger.
The velocity fluctuates wildly from one shot to the next. For example, I had shots at 240fps, and the next shot was 310, 312, and then back down to 280, 245, 270... Wash, rinse, repeat. My stock Tactical, same tank, is rarely -/+ 5-10fps over about 10 shots, and has about the same paint to barrel (mis)match.
When shot, it burps. I've tried to find some info on burping, but couldn't come up with anything.