[pbdude12]

Like the title says iv got a geo3 and it will not turn on. I tried using several new batteries (energizer industrial) with no luck. took the board out help the battery to the board and tried turning it on and still nothing. any ideas?

[Spraypainting]

I've always had bad luck with industrial batteries try a Duracell, also I'm pretty sure industrial batteries have a shelf life on them also

[SpanksIPB]

Double check that you battery is making proper contact with the terminals and that your buttons on the back of the frame are activating the buttons on the actual electronic board.

[pbdude12]

iv tried several different batteries. Also i have taken the board out and help the battery to it and tried turning it on with no luck.

[TeamConcussion#9]

Does it make any sounds? is there any water damage on the board or any corrosion. Where are you located, maybe find a warranty center near you to help out?

[TeamConcussion#9]

Is the battery placed in the proper polarity position?

[pbdude12]

makes no sounds, no corrosion or water damage. gun was used once brought it home, then next day brought it to work to clean and lube and noticed it would not turn on. the battery is player in the proper position. and yes i live near a PE master tech but he will be out of town this weekend.

[jonny72888]

Did it ever turn on?
Open the grip and take a picture of the board with the battery in it.

[Petersen]

A Friend of mine had the Prob that the board was not on the right position in the frame. I fixed it for him.

You can go on following steps:

- Check you`re hearing a "click" by pushing the Power buttom. You have to hear it also without a batterie.
- If you don´t hear any "click" your board need to adjust in the Frame
----> open all 3 Board screws an push it softly to the buttom console
----> close all 3 Board screws
----> Check the "click"

[pbdude12]

problem fixed the board was fried