[stukam17]

So I am going to reserve my what I think I know of this cocker to a minimum with the goal of not looking and sounding like an idiot.

Things I know:
ANS Genx-2 HPR
Kapp hinge-style trigger frame
Kapp trigger
Kapp drop forward
Kapp on/off ASA
Stovepipe style locking feedneck
Dye sticky grips

I will stop there. I am not sure about the back and front blocks, the lpr, ram, especially the 3-way, and main body. There is no serial number on body to go from that I have found. Any thoughts would be greatly appreciated. I believe it to be post 2000 as it has the bigger banjo bolt.







I am trying to decide whether to keep my 97 cocker that I love or this one. I have to get rid of one unfortunately.

[Dk-79]

That is a CCM S5 Frankencocker, as in it's just a mashup of a bunch of box parts. Probably made by a shop or tech, or an enthusiast with more parts than sense.

Shocktech supafly bolt
Sledgehammer STO LPR
STO ram

I'd keep this one over the 97, but I'm a post 2k guy.

This is total heresay, but I believe CCM left their SN's on the bottom of the body under the trigger frame.

[tippmannrocker90]

looks like a shocktech bomb 3-way which are hard to find nowadays

[masterofTHUMBS]

That feedneck and drop forward are ridiculous.

[dirtraven]

at least the cocking rod and bolt pin is wgp

[Darkapollo]

I love the two-HP guage thing..

[dbkid0486]

Originally Posted by tippmannrocker90

looks like a shocktech bomb 3-way which are hard to find nowadays

shocktech still sells them.

[stukam17]

Originally Posted by Darkapollo

I love the two-HP guage thing..

What would be the point of having two gauges as this setup has?

Also, are the blocks CCM as someone said the body was?

[dirtraven]

at one time, all AC owners wanted bragging rights to the lowest working pressure so we had a gauge on the block. the hp reg gauge came on the ANS regs back them.

Originally Posted by stukam17

What would be the point of having two gauges as this setup has?

Also, are the blocks CCM as someone said the body was?

[rschoi_75]

Originally Posted by Dk-79

This is total heresay, but I believe CCM left their SN's on the bottom of the body under the trigger frame.

The SN should be right in front of the barrel threads on the main body. If there is no SN, it is a "naked" Series 5. Those were the ones they never stamped for a SN or lasered.

[stukam17]

Great info and thank you much. I always wanted a cocker when I first started playing in the mid 90's, but didn't do it until about 4 or 5 months ago. The amount of information and combinations for cockers is astounding and fascinating.

[Darkapollo]

customcockers.com/forum

That is the only site you will ever need.

[brienpeppers]

Holy feedneck and drop-forward batman

[addicted2dunes]

Planet Eclipse "Fangz" detent
Shockteck bolt
CCM body, back block, front block
Shocktech Bomb 3-way
WGP Sledgehammer LPR
WGP STO ram?
WGP cocking rod