I'm a new user and am trying to learn my way around my Timmy. Anyway, took it to the field last Sunday and took me a while to get it setup. First of all, when I shot over the chronograph my shots were around 220fps and below. As I adjusted the regulator they went below 200fps. I did notice that once I undid the regulator screw a good way out, the gun didn't get any air at all. Then when I tightened it back in, I heard the air make a seal sound like when you turn the ASA on. Long story short, I was told to adjust the LPR and that seemed to bring me up to 275-285fps. The next problem I had was on the field
Apparently the paint I was using getting stuck in the barrel and I had like 4-5balls come out after taking my barrel off trying to get them out. Any ideas? It was field paint that was orange/yellow with Maddogz written over it. All seems to be fine now, but the gun was making a putting noise again and I had to re-tighten the screw on the back of the gun since it came loose while in play.