 |
11-12-2012, 02:04 PM
|
#1
|
|
|
Axe leaking, can't seem to fix it
Last time I used my axe, it became very inconsistent over the chrono. It has a small leak coming from the bolt. If I put my finger against the bolt face, the pressure builds up against my finger. Gun still shoots though. I've tried cleaning and relubing, changing orings, changed the poppit face, re-setting poppit, cleaned the solenoid, putting the stock bolt back in (been using the lurker bolt) but, its still leaking and I can't seem to fix it. Any suggestions?
|
|
|
|
11-12-2012, 03:20 PM
|
#2
|
|
Join Date: Jun 2012
Location: CT, USA
|
A bolt leak usually points to the valve. You've done everything you're supposed to do when encountering a bolt leak. Provided you did all of the above things correctly, the only other thing I can think of is changing batteries. Your solenoid may not be getting enough juice to open/close efficiently causing inconsistency at the chronograph and possibly causing bolt leak.
|
|
|
|
|
11-13-2012, 08:02 AM
|
#3
|
|
Join Date: Aug 2012
Location: Mid-West
|
If the leak is slow and quiet then try turning the velocity in until its hits, be sure not to over turn it. If the leak is still there the the problem is the bolt guide.
|
|
|
|
|
11-13-2012, 02:17 PM
|
#4
|
|
|
Looks like I'll need a new bolt guide then haha.
|
|
|
|
|
11-13-2012, 09:38 PM
|
#5
|
|
boom headshot
Join Date: May 2007
Location: 703
|
Are there any scratches on the bolt guide or poppet face?
|
|
|
|
|
11-13-2012, 10:44 PM
|
#6
|
|
Join Date: Aug 2012
Location: Waco, TX
|
Ill bet its the bolt guide o-rings, are you sure you put them on in the correct order? Send Boss a PM, hes an axe genius
__________________
Comanche Badlandz Paintball
I would NOT recommend this field to anyone, message me if you have any questions
~Friction~ Texas Storm G6R - Red/Blk Protege - V2 MacDev Clone - 2K WGP cocker Bob Long= King of Poppets - MacDev= King of Spoolies
Sponsors: SlaughterHouse Tattoos Message me for DISCOUNTS!!! Killeen, TX
|
|
|
|
|
11-14-2012, 10:14 AM
|
#7
|
|
|
No scratches on the bolt guide where the poppit face hits. The poppit face looked fine to me, but I changed it anyways, still leaks. And yes I put different bolt guide o-rings on as well, still leaks haha. Someone I play with had an axe, and he had a problem where it leaked. They changed every o-ring, and it didn't fix it. He had to get a new bolt guide. Maybe its the same thing. Weird though, cause everything looks fine. I've cleaned it after each day, and its not even a year old.
|
|
|
|
|
11-15-2012, 08:23 AM
|
#8
|
|
Join Date: Aug 2012
Location: Mid-West
|
Even The smallest nick or cut on the bolt guide can cause problems. I would suggest contacting us at tech@paintballsolutions.com with the following info
Name,
Phone Number,
Shipping Address,
Requesting Bolt Guide for Axe and the color.
With that we can get you a new one. |
|
|
|
|
11-15-2012, 02:10 PM
|
#9
|
|
|
Oh thank you! I'll contact you with the requested information.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
