My first Autococker and questions
Well Ive been out of the sport for a few years and I decided to get back into playing again. Ive always wanted to own an e cocker and I have finally gotten one of my all time favorite guns. I picked up a 2005 prostock for a great deal that had a worr frame and select fire board installed from a 05 superstock. I went out to the local field to day and ended up encountering a few problems. After a few shots trying to get the velocity right, air started gushing out of the regulator. I havent got a chance to take it apart yet but Im assuming its only a seal of some sort. The regulator isnt the real problem though, My board will not program in any of the shooting modes. I have the jumper on ramp setting but it just shoots twice per trigger pull. I tried getting it into the other shooting modes but it wont respond to any position of the jumper. Ive tried several brand new name brand batteries but that didnt work either. So, im wondering if this select fire board is broken or is there something else that can cause this?? Also, if the board is bad, can a I replace the board with a E1 eblade board without getting a new trigger frame?