[jrkoop]

I have a BL Victory v1 with supercharged engine. When I set the pressures with the pressure tester at the recommended settings (210'ish and 75-85) I'm lucky to get around 180 FPS. After gently adjusting HPR and LPR I was able to shoot at around 280. However, when I then checked my pressures with the pressure tester the LPR pressure was right around 100 and the HPR pressure around 250. Does that seem right to you or is there something else going on?

Tonight I took the marker completely apart and cleaned and lubed LPR, HPR and engine. Unfortunately, I'm out of air so haven't been able to check whether or not this fixes anything.

Any help is much appreciated.

Thanks,
Koop

[bronze]

Are the gauges the stock bob long gauges. They are kown to be junk

[jrkoop]

Yep, pressure tester that came with the marker. Does anyone make one that is known to be accurate? Thanks.

[gamer565]

Ashcroft

[xeese]

Koop - I will be at the BR field in Coats next weekend and have my tester with me if you need to use it.

[jrkoop]

Cool, much appreciated. I was also going to swap out the gauges of my tester with Ashcroft gauges per someone else's recommendation.

Koop

[xeese]

Mcmaster-Carr is a great place to get gauges from.

Line Description Ordered Shipped Balance Unit Price Total
1 3847K57 Multipurpose Gauge, Plastic Case, 1-1/2" Dial, 1/8 NPT Center Back, 0-300PSI 2
Each
2 0 9.60
Each
19.20
2 3847K55 Multipurpose Gauge, Plastic Case, 1-1/2" Dial, 1/8 NPT Center Back, 0-160PSI 1
Each
1 0 9.60
Each
9.60

[jrkoop]

Awesome. You are da man!

[jrkoop]

Also found these:
http://www.zdspb.com/store/pneumatics.html

From this guy:
http://www.zdspb.com/site/about.html

Since he's a dedicated paintballer and his prices are also very good I thought I'd throw my business his way.

Thanks for all the help.