[DanXC]

I followed the guide here
http://www.paintballforum.com/new-pl...ers-masks.html
And came up with this
Tank
http://www.ultimatepaintball.com/sho...0psi-hp-output
Marker
http://www.ultimatepaintball.com/sho...un-silver-grey
Helmet
http://www.ultimatepaintball.com/sho...gles-black-acu
Hopper
http://www.ultimatepaintball.com/sho...0-round-loader
What is your opinion on this setup?

[DanXC]

Btw more of will these parts work together, i know that it is entry level as it is my first marker and I am buying it for woodsball primarily.
Also important!!!
Is it worth it to spend more money for a 4500psi rather than a 3000psi?

[peacob]

Hopper is as cheap as it gets... So you should know what you're getting into with that.

I'd most definitely ditch the spyder and get a used PMR or at least an Ion. You should be able to find those for around 80-120 used. Then forget that garbage hopper and buy a used Halo Too for around 40-50$ used.

Yes, its worth it to buy a 4500 psi tank, especially for woodsball when games last quite a long time

[DanXC]

I need the final price to be 300 or under. If i got a pmr that would leave me 50 for a mask, tank and hopper which i could do but then the mask tank and hopper would all be crap. Would it be smarter to get the pmr with a cheap as hell mask, tank and hopper or the spyder with quality parts so if i buy a better gun one day I wouldn't need to upgrade the other components. Also if i stuck with the spyder and got a better hopper is a 3000psi tank that much worse than the 4500psi tank i listed above? If i got a 3000psi then i could get a much better hopper.
Edit: I'd rather not buy used.

[ErflesMcBride]

If you are limited to that much money, a 3000 psi will do you fine, I have two, I normally go one fill per round, which is about a full pinokio and 4 pods, look for a used tank, they are dirt cheap on here too. Make sure that you get a good hopper, because if you have a great gun, but a **** hopper, then the gun serves no purpose because you can't feed without breaking paint or missing shots. As for a gun and mask, look used. You can find an events for 30 bucks on here or a grillz for 50 and for the gun, a used PMR, or if you really have to, an slg, both of which should run 80-150. Hope this helps.

[DanXC]

Thanks for all the help!
Would ya'll suggest buying off the FS forums here?

[SKI008]

Originally Posted by DanXC

Thanks for all the help!
Would ya'll suggest buying off the FS forums here?

Yes with the caveat that you only deal with high feedback people. There are a lot of scammers out there and being new you might not be able to recognize them as such.

Also that hopper is for 50 cal which is an abomination of fail and AIDs. Don't ever speak of it again. Just get .68 cal stuff. I would recommend spending $40-$50 on a used Halo in the BST. Much better loader.

[ErflesMcBride]

Yes, definitely check the bst forums in here for it, but as he said make sure you know the high feedback, also check for local sales in the regional section so you can have your hands on what you are buying before you buy it. Also you should check out your local Craigslist as well, there will be a really good deal on there once in awhile

[pedrofb19]

you picked a .50 cal gravity feed hopper btw