[moises21694]

I had my mini orracle mid blocked by jcurt but the sled was grinding on the body so much that it was really hard to pump. Does anyone know if this black magic sled will work with his kit?

Yes i asked him but hes busy and takes a while to get back to me.
http://paintballgateway.com/wgp05blmakam.html

[clarkie070988]

Try sanding the sled before buying a new one that might help

[moises21694]

I actually did and it did help a bit but no where near being as smooth as it was full block.

[clarkie070988]

Try doing it a little more

[Castro #66]

Before you get crazy with reshaping your sled, you might want to look into (or have someone help you look into) the real reasons it is binding up. Obviously I can't see your gun in person right now, but I can tell you that most people have difficulty finding the source of the problem when it comes to smoothing out a pump gun, and that's why almost nobody matches CCM guns.

[Ninja1058]

try putting some lube on the sled and the pump arms?

[moises21694]

Its completely ccm'd with all brand new parts. its a project Ive been doing. its definitely the sled I narrowed out all the other possibilities, I slimmed it down a bit more and it has helped but not how it should be, thats why im wondering if the sled from pbgateway will fit the window from the upper to lower tube.

[Castro #66]

It's worth a shot, but you realize you're asking others if a factory part will fit your custom-cut body? There's no way for us to know that. Chances are if you had the cut and the sled done by the same person, they will fit the best, even if it requires a little work.

[moises21694]

Originally Posted by Castro #66

It's worth a shot, but you realize you're asking others if a factory part will fit your custom-cut body? There's no way for us to know that. Chances are if you had the cut and the sled done by the same person, they will fit the best, even if it requires a little work.

he didnt cut the window between the lower and upper tube, its their from wgp which is why im asking if anyone has used the blackmajic sled on a mid blocked oracle. He told me he had this exact problem on other markers and it was always the sled

[R3L]

Is it fully assembled? My Jcurt midblock orracle caused panic because it seemed to be binding so badly at first. Once I put the bolt and the pin in, it was fine.

[super_stanchy]

the ccm internals might be too big for the lower tube (too tight)
the midblock pin might be rubbing on the slot
your pump arm might be bent

there are a few different factors that can play in...

[moises21694]

Originally Posted by super_stanchy

the ccm internals might be too big for the lower tube (too tight)
the midblock pin might be rubbing on the slot
your pump arm might be bent

there are a few different factors that can play in...

The hammer and pin were not smooth so they weregringing on eachother when I would cock it. I polished them both and its smooth now.

Off topic can you Pm me a quote for return shipping and cost to bore a newer style kaner barrel for freak inserts? Turn around time also please.

[super_stanchy]

Originally Posted by moises21694

The hammer and pin were not smooth so they weregringing on eachother when I would cock it. I polished them both and its smooth now.

Off topic can you Pm me a quote for return shipping and cost to bore a newer style kaner barrel for freak inserts? Turn around time also please.

check my thread in my sig... all the pricing is in it