 |
11-03-2012, 06:50 PM
|
#1
|
|
ummm
Join Date: Oct 2012
Location: tacoma
|
leaks air
i ahve a "11 reflex rail is fully cleaned o rings are brand new and just replaced today at the field at PSP and is leaking air threw the trigger. anyone know whats wrong.
|
|
|
|
11-03-2012, 07:42 PM
|
#2
|
|
Join Date: Aug 2012
Location: Salida, CA
|
The common answers
1. Fresh Duracell battery ?
2. All settings stock ? Dwell
From the manual
AIR LEAKING BETWEEN BODY AND FRAME
• A leak between the body and the frame can be
caused by a couple of things.
• First Check that the Hyper3 reg is not set too
high or too low.
• If above doesn’t help, remove the frame from
the RAIL™ and check the hose connections
between the solenoid and the hose fittings.
• Last possibility is that one of the hose fittings
is leaking. Gas up the RAIL™ without the frame
attached and try to locate the exact point of
leakage. If the leak is coming from one of the
hose fittings, remove the screw, check and
replace any damaged o-rings and re-attach
screw to the body.
|
|
|
|
|
11-04-2012, 12:21 AM
|
#3
|
|
ummm
Join Date: Oct 2012
Location: tacoma
|
fps is at 290 havent changed the battery since 2 weeks ago
|
|
|
|
|
11-04-2012, 01:39 AM
|
#4
|
|
Join Date: Apr 2011
Location: Colorado
|
Try playing with the solenoid. Too tight and it will leak. If you haven't touched it ever then the gasket may be dry. Also be sure the can orings aren't cut. I know you said you replaced them but the threads for the back cap can slice em when re installing the bolt...
__________________
MOWING FACES WITH A KARNIVOR PRO
Paintball is like drugs: It's expensive, addictive, and it hurts everyone around you.
|
|
|
|
|
11-04-2012, 10:35 AM
|
#5
|
|
ummm
Join Date: Oct 2012
Location: tacoma
|
i havent ever touched the solenoid gasket so that could be the problem.
|
|
|
|
|
11-08-2012, 10:56 AM
|
#6
|
|
Join Date: Jul 2009
Location: USA
|
my would be solenoid gasket too, remove solenoid, lube gasket lightly, see if that helps
|
|
|
|
|
11-09-2012, 05:29 PM
|
#7
|
|
Join Date: Nov 2012
Location: TN
|
I had the same issue with my reflex rail, same year.
the issue with mine was the noid, remove the noid, clea and relube and reassemble. cycle the noid a few times and it should be fine. if not hit me up.
|
|
|
|
|
11-09-2012, 05:32 PM
|
#8
|
|
Join Date: Nov 2012
Location: TN
|
one more thing: lighlty coat were you think the leak is, if theres bubbles thats were its at, if not then try fallowing the air. another instance i had was the hyper 3 air inlet spool had to be re laced, (remove retape with spool tape reinsert)
|
|
|
|
|
11-11-2012, 02:13 PM
|
#9
|
|
|
leaky noid
Air leak behind the trigger, so I pulled it apart this morning and found that the base of the solenoid was cracked. The marker was purchased one month ago and has been working great, up until yesterday. Never changed stock settings, and ran a consistent 280/290 fps for 14 cases of paint. Since Dye is right up the street it's going back on Monday.
__________________
One Cast, One Kill
Proto Reflex 2012
Air Tank 68/4500
Rotor
E-Flex
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
