 |
10-19-2012, 07:37 PM
|
#1
|
|
El Tigre #19
Join Date: Jul 2012
Location: Minnesota
|
Trilogy pump leaking
Just put it together and its leaking out of the bolt and the pump guide, bought the gun used and never tested it before turning into a pump......any suggestions?
|
|
|
|
10-19-2012, 09:41 PM
|
#2
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
did you cock it first? if it still leaks, check your reg pressure. and if it still leaks, check your valve.
|
|
|
|
|
10-19-2012, 09:44 PM
|
#3
|
|
El Tigre #19
Join Date: Jul 2012
Location: Minnesota
|
Yes cocked it, new to auto cockers, what is all that?
|
|
|
|
|
10-19-2012, 10:08 PM
|
#4
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
|
|
|
|
|
10-19-2012, 10:09 PM
|
#5
|
|
El Tigre #19
Join Date: Jul 2012
Location: Minnesota
|
Yup.........sorry
|
|
|
|
|
10-19-2012, 10:28 PM
|
#6
|
|
THAT COCKER/PUMP GUY...
Join Date: Oct 2010
Location: Chesapeake, VA/L.A., CA
|
it's cool. i think there's a vid on how to tune pumps on youtube. >>> same process |
|
|
|
|
10-19-2012, 10:30 PM
|
#7
|
|
El Tigre #19
Join Date: Jul 2012
Location: Minnesota
|
Awesome thanks man
|
|
|
|
|
10-20-2012, 09:48 PM
|
#8
|
|
El Tigre #19
Join Date: Jul 2012
Location: Minnesota
|
So took it all apart, valve seems fine no dings where it seats against cup seal, but cup seal is hard as a rock with a ring worn into where it seats against valve, o rings were fine, was really dirty in the lower of the body but all cleaned out and re lubed and still leaks.....
|
|
|
|
|
11-04-2012, 03:08 PM
|
#9
|
|
Pump Playa
Join Date: May 2011
Location: North Vancouver
|
Switch out the cup seal then. Also Try screw in the Stuff more, if it's leaking from the pump guide arm, maybe you just didn't screw it in tight enough or use some plumbers tape.
|
|
|
|
|
11-06-2012, 09:06 AM
|
#10
|
|
Keep the pump hand strong
|
I highly doubt your issue is the cup seal, those things are meant to be hard, it's a high pressure gun. The valve o-ring is a more likely culprit, followed by some oil in the vertical ASA and a few shots.
The pump guide likely needs an oring and/or tightening.
__________________
Certified Master Airsmith
Airsmithing & 3rd Party Shipping - PM for details
Can't we all just play Paintball?
|
|
|
|
|
11-06-2012, 09:08 AM
|
#11
|
|
El Tigre #19
Join Date: Jul 2012
Location: Minnesota
|
Yeah the brand new o ring that came with the pump guide was crappy and that was the whole problem
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
