Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-05-2012, 07:31 PM #1
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
TheUrbanGent's CCM'd Dynasty Shocker Build.. $$

Ok guys.. I have always wanted to completely piece a Shocker together from scratch & I finally have the means of doing it. I have been collecting random Shocker parts for some time, and now I am about to embark on my project.

Here's what I am looking at so far. Please let me know of any input you may have to make this better! & now for the pictures!

The body I am looking at using is this Dynasty SFT ('05 I believe?) It was milled for NXT BB eyes by CS. The body overall is in great shape for it's age!



I am dead set on using this CCM RIP frame on this project. I also have a silver Dynasty SFT frame as well as a normal silver SFT frame. input on my choice of frame will be heard..



For the VA and the regulator I have a black Dynasty VA and a Bob Long 360 Torpedo regulator. I have a couple more VA's and an old school Torpedo regulator as well as a black CP regulator I can use.



For the bolt I will be using a NDZ low pressure spring modded bolt guide, Pooty flat face bolt, with an ultra low pressure firing can. The whole bolt is Pooty except for the bolt sleeve.



I still need to get a rail for the ASA I will be using. I have also contemplated getting the CCM frame milled with a dovetail if that is possible?



These next parts are new replacement parts I will be using as internals. Nothing too special about these really. New noid with upper board, BB NXT eyes, wiring harness, and NDZ stainless steel high flow ported manifold.





I sent a Virtue OLED board I had laying around off to Virtue for repair earlier today, which I will be using on this gun. Once I have decided on all the parts I will be using I am planning on sending this bad boy off to get a clean anno so it really stands out! I will be continually updating this thread as this gem develops! Thanks for looking and anyones input will be heard!
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-05-2012, 07:36 PM #2
tomM925
R.I.P America.
 
tomM925's Avatar
 
Join Date: Nov 2006
tomM925 supports DLX Technology
I love my ccm'd dynasty. excellent choice
__________________
Factory Black

OBAMA SUCKS.
tomM925 is offline   Reply With Quote
Old 11-05-2012, 07:42 PM #3
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
I'm stoked on this project!
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-05-2012, 07:51 PM #4
SeanP.
Outburst United
 
SeanP.'s Avatar
 
Join Date: Sep 2008
Location: Milpitas/San Jose
SeanP. owns a Planet Eclipse Ego
SeanP. supports Pev's Paintball
Eigenbolt.
__________________
SCP. Cutting Edge PB.
PINOYBALLASOCIETY
WCPPL
SeanP. is offline   Reply With Quote
Old 11-05-2012, 08:29 PM #5
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
So I already ran into an issue.. The screw hole that the VA screw goes into seems to be stripped... Is there a simple fix to this or am I SOL with that body?
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-05-2012, 08:46 PM #6
tomM925
R.I.P America.
 
tomM925's Avatar
 
Join Date: Nov 2006
tomM925 supports DLX Technology
Find a machinist or something bro. Im sure theres someone right here on nation that can work a little magic
__________________
Factory Black

OBAMA SUCKS.
tomM925 is offline   Reply With Quote
Old 11-05-2012, 09:58 PM #7
DyeBalla182
DLX Sales Representative
 
DyeBalla182's Avatar
 
Join Date: Sep 2006
Location: |Bay Area, CA|
DyeBalla182 is BST Legit
DyeBalla182 supports Bob Gurnsey
DyeBalla182 supports our troops
DyeBalla182 is one of the top 1000 posters on PbNation
DyeBalla182 is Legendary
DyeBalla182 is Boss
DyeBalla182 supports DLX Technology
Quote:
Originally Posted by SeanP. View Post
Eigenbolt.
This
__________________
------------------------------------------------------
|Remember Brett Olson; Rest in paradise|
------------------------------------------------------
|Luxe Mob|DLX Technologies|Shoot One|
------------------------------------------------------
B/S/T: |Legit CCM'd Karnivor Pump F/S/T|
------------------------------------------------------

DyeBalla182 is offline   Reply With Quote
Old 11-05-2012, 10:15 PM #8
d-r0ck-1489
i need more cowbell
 
d-r0ck-1489's Avatar
 
Join Date: May 2011
Location: Charlotte, NC
d-r0ck-1489 is playing at Living Legends V
d-r0ck-1489 has achieved Level 3 in PbNation Pursuit
That stripped hole should be an easy fix. if it can't be tapped; you use a helical insert.

I have 2 Shockers i have pieced from scratch. Love em both and were fun to build amd currently working on a shego Dynasty same style and color as yours
__________________
"Originally posted by KookieMonster: nope... though it would be interesting to see if anyone would sig anything I've said. :D"

Don't stop dreaming; unless your dream is stupid.
d-r0ck-1489 is offline   Reply With Quote
Old 11-05-2012, 11:06 PM #9
Shooter28
PEACE
 
Shooter28's Avatar
 
Join Date: Jul 2007
Location: CENTRAL FLORIDA
Shooter28 plays in the PSP
Shooter28 plays in the APPA D3 division
Shooter28 supports DLX Technology
Shooter28 supports Empire
I just put a ccm on my waffle, now I have to reconsider selling it.

Nice build
__________________
Rebel.Renegade. Must stay paid.
sh(--)ker Owners v.LXII
Macdev
ΞΞ

R.I.P. Rob Kerr 2/1/91 - 3/15/10 & {HSP}
Gun Sale Thread | SHOCKER PARTS!!! | My gun collection | D00M.
Shooter28 is offline   Reply With Quote
Old 11-05-2012, 11:52 PM #10
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the APPA D4 division
jim4130 has perfected Level 1 in PbNation Pursuit
jim4130 is one of the top 500 posters on PbNation
jim4130 is Legendary
Quote:
Originally Posted by TheUrbanGent View Post
So I already ran into an issue.. The screw hole that the VA screw goes into seems to be stripped... Is there a simple fix to this or am I SOL with that body?
You can either heli coil the body. Or drill and tap the body to use an NXT va which might even give you some room between the reg and trigger guard for macro fitting to hide in.
__________________
OBE
SBPB

come check out my gun collection

shocker owners

win a free luxe!!!
jim4130 is online now   Reply With Quote
Old 11-06-2012, 08:08 AM #11
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
Quote:
Originally Posted by jim4130 View Post
You can either heli coil the body. Or drill and tap the body to use an NXT va which might even give you some room between the reg and trigger guard for macro fitting to hide in.
Do you know of anyone on the nation that could do something like this?
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-06-2012, 08:18 AM #12
jim4130
proud gmax owner!!!
 
jim4130's Avatar
 
Join Date: Jul 2008
Location: woburn MA.
jim4130 plays in the APPA D4 division
jim4130 has perfected Level 1 in PbNation Pursuit
jim4130 is one of the top 500 posters on PbNation
jim4130 is Legendary
Cs900 but he's very busy and has months worth of backed up work to my knowledge. ATLballaz might have able to do it aswell.
__________________
OBE
SBPB

come check out my gun collection

shocker owners

win a free luxe!!!
jim4130 is online now   Reply With Quote
Old 11-06-2012, 11:52 AM #13
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
I'm talking with Cs900 about fixing this. I will most likely be getting the SFT threads fixed as well as putting NXT VA threads on as well!
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-07-2012, 12:54 AM #14
skinz-n-bonez
 
 
skinz-n-bonez's Avatar
 
Join Date: Mar 2005
Location: Twin Cities, MN
Annual Supporting Member
skinz-n-bonez owns a Planet Eclipse Geo
skinz-n-bonez owns a Planet Eclipse Ego
skinz-n-bonez has perfected Level 1 in PbNation Pursuit
skinz-n-bonez has achieved Level 2 in PbNation Pursuit
I actually am putting a similar build together......

Have a couple questions for you.......

I was considering the BL 360 reg also, but realized that it's min psi operation is 200 psi. If you decide to go with a LP set up, how does the reg affect performance since it's limited to 200 psi?

My body was milled for BB eyes also, but from my experience, I am having a hard time fitting the NXT break beam eyes through the side that was modded. It seems as thought the opening was drilled to fit the custom eyes Speed uses only. If you have tips on how to fit it through, that would be great. I've tried Virtue eyes also.
skinz-n-bonez is offline   Reply With Quote
Old 11-07-2012, 04:48 PM #15
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
So I'm sending the body off to get the VA threads fixed as well as getting it threaded for a NXT VA.
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-07-2012, 09:41 PM #16
ATLballaz (Banned)
 
 
ATLballaz's Avatar
 
Join Date: Jul 2006
Location: ATL
ATLballaz owns a Planet Eclipse Geo
ATLballaz supports Sherwood Forest
ATLballaz plays in the APPA D4 division
ATLballaz is Legendary
Very nice. I was going to message you about fixing the threads and setting it up for the nxt VA.

Lmk if I can help.
ATLballaz is offline   Reply With Quote
Old 11-15-2012, 09:17 PM #17
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
Sent out the body for the new threads. Will post pics when I get it back!
__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-20-2012, 07:12 PM #18
kool_aid22
[[[O]]]
 
kool_aid22's Avatar
 
Join Date: Sep 2011
Location: Atlanta
kool_aid22 is BST Legit
kool_aid22 is Legendary
kool_aid22 supports Empire
Sell me those nxt eyes
kool_aid22 is offline   Reply With Quote
Old 11-21-2012, 02:22 PM #19
TheUrbanGent
d-.-b
 
TheUrbanGent's Avatar
 
Join Date: May 2012
Location: Oahu
Annual Supporting Member
Quote:
Originally Posted by kool_aid22 View Post
Sell me those nxt eyes
Hit up fishballer. He's the one that hooked me up.

__________________
Dynasty Waffle Owner
ballin' since '04
TheUrbanGent is offline   Reply With Quote
Old 11-21-2012, 09:29 PM #20
perez62682
 
 
perez62682's Avatar
 
Join Date: Oct 2012
you get body backk yet? waiting to see this masterpiece complete
__________________
Playing with my money is like playing with my emotions
perez62682 is offline   Reply With Quote
Old 11-21-2012, 10:40 PM #21
Japy
Paragon 2014
 
Japy's Avatar
 
Join Date: Sep 2010
Location: Mid Michigan
Annual Supporting Member
Japy is BST Legit
Japy plays in the PSP
Japy is playing at Living Legends VII
Japy has perfected Level 1 in PbNation Pursuit
Japy has perfected Level 2 in PbNation Pursuit
Japy has perfected Level 3 in PbNation Pursuit
Japy supports Empire
Quote:
Originally Posted by skinz-n-bonez View Post
I actually am putting a similar build together......

Have a couple questions for you.......

I was considering the BL 360 reg also, but realized that it's min psi operation is 200 psi. If you decide to go with a LP set up, how does the reg affect performance since it's limited to 200 psi?

My body was milled for BB eyes also, but from my experience, I am having a hard time fitting the NXT break beam eyes through the side that was modded. It seems as thought the opening was drilled to fit the custom eyes Speed uses only. If you have tips on how to fit it through, that would be great. I've tried Virtue eyes also.
BL360 regulators I have (2 of them) both are adjustable from around 100psi to well over 200psi.. Not sure where you're getting your numbers from?

The 360 makes an excellent choice for any electronic gun because it has one of the fastest and most consistent recharge rates on the market, without being terribly pricey or ugly. Love mine.
__________________
"Originally posted by EastCoastAngel: He came up under gen bolder....I thought it was a ****ty chick....turns out I was half right....he status updates like a drunk whore"


Looking for some Gats?
Japy is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump