Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-01-2012, 07:41 PM #1
pballer0303
shreddin the gnar
 
pballer0303's Avatar
 
Join Date: Nov 2009
Location: Duluth
pballer0303 has achieved Level 2 in PbNation Pursuit
Shego...what needs to be done?

Ive decided on what my winter project will be, a shego. I do have access to a mill, and Im willing to use it.

So what do I need to do other than fit the frame?

Should I use an etek board? Shocker board?
pballer0303 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-01-2012, 08:26 PM #2
Box
Wroooaaarrrr!
 
Box's Avatar
 
Join Date: Sep 2005
Annual Supporting Member
Box is playing at Living Legends VII
I'd go for the Ego board. It eliminates the terrible upper board and requires less modification, while allowing break-beam eyes. You'll have to wire an Ego/DM solenoid connector to the Shocker noid, or use an 05/06 Ego Noid. There will be a little meat to take off the Ego trigger if you choose to use a Shocker noid.


Search "Shego" StrangeBalla55 made a how-to
Box is offline   Reply With Quote
Old 11-02-2012, 07:52 PM #3
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
1st- determine 05/06 ego noid or shocker/impulse/sport
2ed- desolder upper board, solder leads on noid, crimp, and take noid mounting screws to correct size
3rd- probably going to want to use ego board and eyes(oled screens are nice)
4th- (only if you use shocker noid) mill the top of the frame and back of the trigger to fit noid
5th- drill holes to mount frame to the body
6th- drill/mill body for break beam eyes.
inmylife2415 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump