[zs89]

i just bought what i think is a 04 prostock off ebay,

what do you guys think, also any tips would be appreciated

[Darkapollo]

They function well enough stock..
Yes its an 04 Pro.. Not much going on with it really..

[mymutter]

If it works, don't mess with it.

[dirtraven]

'04 Prostock's pneumatics was pretty much some of the best parts for a regular cocker.

[zs89]

just came in today seems to work fine came with a all american barrel, its missing a few of the little set screws that hold the rods in place, is there a specific place or will the hardware/paintball field have them?

[Dk-79]

1/16th drive x 1/8th inch long

I think they're 6-32 threading. Pretty much any place that sells set screw will have them, and they're important.

[zs89]

yup from what ive read they hold the rods from comming out of adjustment correct?

[Dk-79]

Well, they're only on one rod, and it's more of a coupling.

Without them, the point of where your gun recocks will be able to roll around and if you're missing both, the collar isn't actually holding onto the three way shaft at all.

Which causes some issues, you can imagine.

[Vask]

They are definitely 6-32 set screws; truevalue hardware has them; just grabbed some the other day.
if you cant find them, ill sell you 2x for $5 shipped.

[addicted2dunes]

Just to let you know just because there is empty holes doesn't mean a set screw goes there. There should only be one set screw per side on that coupling. Two in total, there are more holes then two but only the two are needed.

[zs89]

Good to know, I know im missing at least one then, im sure I'll have alot more questions when I start cleaning it tonight