I have over $200 in upgrades added to this gun!
Because of the upgrades, this gun shoots better than new. It's shot to shot consistency is excellent and mechanically it operates as smooth as humanely possible. Because of the CP micro drop the balance of the gun is vastly improved and fits tightly into the shoulder.
The 45 degree fitting causes the macro line to exit nearly straight back and allows you to completely grip the reg. The stock 90 degree fitting forced you to awkwardly grip the reg.
I'm going to list the condition as 7/10. There is some slight wearing of the paint in the usual spots and the bore has some scoring (shown in photos).
There are zero leaks except at the lower macro line fitting. This would be very easily fixed by shortening the macro line a tiny bit.
Upgrades
- TechT Hush Bolt
- CP Pro Mini On/Off ASA
- CP Micro Razor Drop Forward
- Azodin Rocksteady Regulator Seat
- Lapco Cup Seal (4 extra included)
- 32 Degrees MagnaPort Valve
- Low Rise Clamping Feedneck
- Azodin Stainless Pump Rod (original aluminum rod included)
- Azodin Guide Rod (original included)
- 45 Degree Macro line Fitting
- All screws internal/external have been replaced with matched stainless steel screws
- Upgraded trigger return magnet (largest possible grade N42 neodymium)
- New Azodin solenoid (only a few hundred shots fired with it in the gun)
Extras Included
- Sypder Spring Kit (8 springs, new/unused)
- Azodin Slide Switch (new spare)
- Azodin overhaul parts kit
- BunaN O-ring kits (3x)
- Stock Azodin On/Off ASA
- Stock Azodin Feedneck
- Stock Azodin Bolt
- Stock Azodin Valve
- Stock Azodin Screws
No barrel included.
SOLD SOLD SOLD.
Will ship USPS Tracked.
On to the pics!
